Save $50 on Freeman Combo Kit
Includes a 2" Brad Nailer and 1" Micro Pinner.
Buy Now $69.99
WoodRiver® Universal Mobile Base Kit
Save $13 and go mobile with this Mobile Base Hardware Kit.
Now Only $49.99
Pizza Time! Save $3 On This Pizza Kit
This heavy-duty Pizza Cutter features a 2½" stainless steel blade.
Make Yours! $9.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
worked so well I bought more
Micro-Mesh 3 x 4 Soft Touch Sanding Pads
I make duck and goose calls. When the turning on the lathe is done, I sand the call with fine grit sand paper and then I use fine steel wool. After that, I use the micro mesh sand pads. Start with the courses one and go down the line to the finest grit. You will be amazed at the finish you get,I was, and if you want it to look even better, buff it on a buffing wheel.
Yes, I would recommend this to a friend
Create the ultimate shine!
I finish my sanding with 800 grit sandpaper wet or dry, then start with the Micro-mesh. These work best on synthetic surfaces but also on hard, dense woods. Wet and/or dry polishing works well. I cut the 3 X 4 inch pads in half. Heat is the enemy of these pads, if you always wet sand they last for 50 or more pens. If you want a gloss finish you need to learn how to use these.
Micro-Mesh pads work quite well for pens
St. Louis Metro East
Micro-Mesh pads work very well for finishing pen blanks. I cut the 3" X 4" pads in half to use for finishing pens and the cost is a little more reasonable than buying the 2" x 2" pads. I have used these on several acrylic pens as well as some high oil content wood pens which don't require any other finish.
1 - 3
Back to top
©2014 by Woodcraft Supply LLC