Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
WoodRiver Clamp Guide Universal Base for Routers and Circular Saws
The base could be a little thicker, but otherwise works as advertised. Used in combination with the edge clamps works very well
Yes, I would recommend this to a friend
Works very well with the clamp guide
I bought this to use with the Woodriver clamp guide. I attached it to my plunge router and I am very pleased with it. All it took was drilling a few holes. They work very well together.
Works As Advertized
Jack the Scribe
End of the Earth, IA
I purchased this along with the 36" WoodRiver clamp and together they work very well. You cannot compare this to guides and clamps that are hundreds of dollars, but if you have an occasional use for one this is the one to get.
Works like a charm.
Combined with the clamp guide, this is a great system. Mounted a Makita hypoid circular saw to the base. It's like having a track saw without the big $$s.
Makes cutting plywood sheets a breeze.
Easy to install.
Buying another for my router for dadoes.
I highly recommend for the DIY woodworkers.
I've never made such square cuts on plywood before.
Not well made at all...
This thing showed up with a visible bow in the plastic plate that your tool mounts on... It's not flat at all. Clamping helped some, but for this money, it should be dead flat. There is also considerable slop in the fitment slot to the guide clamp. Will not affect a circular saw cut as much, but will definitely make a dead straight router cut (such as a shelf dado) very difficult to achieve. Also, there is no mounting hardware for your tools, nor any instructions. You are left totally on your own. Disappointing...
No, I would not recommend this to a friend
Works with Guide Rail System
The product description says that this is for the Guide Clamps. However, it works with the newer Guide Rail system as well.
1 - 6
Back to top
©2014 by Woodcraft Supply LLC