Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Jim the Runner
San Jose, CA
Dust Collection Fitting, Blast Gate, Aluminum, 2-1/2" OD
When gate is opened it leaves a very large gap at the bottom end of the housing. Almost 20% of the suction is lost.
No, I would not recommend this to a friend
Gate won't close all the way..
I had to gring the gate so that it would close all the way. Now they are working fine.
A vast improvement over ABS blast gates
San Rafael, CA
The anti clog design eliminates all the time I spent clearing my ABS gates. I switched all my 4" gates out months ago and was pleased to finally find a 2 1/2" aluminum gate.
Yes, I would recommend this to a friend
Does the Job
Chula Vista, CA
The blast gate is well made with an aluminum body and sheet metal slide. The flanges fit 2-1/2" hoses and used with a metal hose clamp seal very well. The edges of the slide are slightly sharp, but a couple of minutes with a file cured that issue.
1 - 4
Back to top
©2014 by Woodcraft Supply LLC