Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
Titebond No Run No Drip Glue, 16oz
I started using this for some of my woodworking. I like it especially for gluing the keys into a miter joint. It fills any voids and dries clear. The glue tacks strongly even if you don't clamp it, just hold it tight a little while. You can reposition it shortly after it tacks. Once it grabs it will not slip or slide and has a strong bond.
Yes, I would recommend this to a friend
The Sticky Stuff Works
White Bird, Idaho
I used Titebond Molding Glue to apply face strips on a large library shelf unit. Because of construction space restrictions, nine individual units each about 8 feet tall and 2 feet wide were prefabricated in the shop. These were moved into the library and assembled on a toekick base unit. The mating surfaces or "lines" between each connected unit were then covered with prefinished 1/8 inch thick strips of wood cut to fit the vertical joined pieces and the individual shelf front edges. The glue works as advertized and did not drip or run as I assembled the pieces. It dries fairly fast but you do have time to get the strips in place. This glue would work in any application where you are gluing parts that are vertically oriented and you need to make sure that the glue does not run or drip. The glue seems to have a long life too. After nearly a year in place, I see no failures at all.
1 - 2
Back to top
©2014 by Woodcraft Supply LLC