Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Fits like a glove.
CARTER Urethane Tire For 14" Band Saw, 7/8" Wide
Bought this for my Porter Cable 14" band saw model PCB330BS and the tire fits perfectly. I couldn't be happier.
Yes, I would recommend this to a friend
Smith Point, TX
New tires made my 20 year old Delta 14" bandsaw better than new! Fairly easy to install. I also added the Carter guides and tension spring. This is the fastest/best upgrade for any bandsaw.
Very pleased with band saw tune up
This was part of an over all bandsaw tune up including blades, low friction rub blocks, and tires. The combined effect was quite remarkable.
I'm now only limited by my ability to set the machine up and am encouraged to take on more challenging projects.
There is a bit of a knack to mounting the tires. Be sure to leave the tire in the hot water long enough so the plastic is fully up to temperature, then go for it.
Carter Urethane Tire
Woody the Woodturner
Follow directions and it is no problem to install. This is a very good tire. I have had no slippage or any problems with it. When necessary I will replace it with the same tire.
These tires do not fit all 14" bandsaws. Carter does not provide a list either. I purchased these for a 14" Grizzly G0555 only to find out after installation that the tires move from side to side on the wheel if the wheel is slightly wider than the tires. Apparently this is a known issue and Carter's solution is to spot tack the tires to the wheels with epoxy. Why not just provide a warning for customers on the packaging. Disappointing from such a quality company. A waste of time and money. I would not recommend these tires because of Carter's failure to make the buyer aware of the possibility of movement.
No, I would not recommend this to a friend
with they were 1" wide to better fit my saw, but they work 7/8" and the blade rides fine so far.
My bandsaw works great
My Father gave me an 18 yr old bandsaw and all it needed were the tires. Instructions were very helpful. You have to let it warmup in hot soapy water for 5 min. and then put on. The top one went on fairly easy, but the bottom was harder. I ended up using two plastic grip clamps to hold my progress as I moved around the wheel. The blade runs true on the tires and I haven't had any problems.
Lose your rubber tires!
Getting rid of the stock rubber tires on my 12 year old 14" Jet and installing these urethane tires made a HUGE difference in the performance of my saw. For the first time, my blades track perfectly, even after long resawing sessions. Installation was easy - just folow the directions to the letter. It helps to have a second person to help hold the wheel as the new tire goes on.
Heat and place
Heat and place, No problems bandsaw runs true and quite.
I would buy again
a little tough to install ,but worth it.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC