Save $50 on Freeman Combo Kit
Includes a 2" Brad Nailer and 1" Micro Pinner.
Buy Now $69.99
WoodRiver® Universal Mobile Base Kit
Save $13 and go mobile with this Mobile Base Hardware Kit.
Now Only $49.99
Pizza Time! Save $3 On This Pizza Kit
This heavy-duty Pizza Cutter features a 2½" stainless steel blade.
Make Yours! $9.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
Wobbles and too short
Timber Wolf Bandsaw Blade 111" x 1/2" x 4 TPI Positive Claw
The blade is only 110 3/4" long and doesn't mount easily on my saw, which has a quick release cam mechanism to raise and lower the upper wheel. With coil spring totally loose, it's already tensioned up when engaging the quick release cam lever. Also, the weld was uneven so the blade flopped around and I spent forever playing with my saw's upper and lower wheels suspecting it was my saw. Other blades didn't wobble, and I found it was this blade. Also bad experience with the 111" x 1/4" blade.
No, I would not recommend this to a friend
Bad welding process makes blades wobble
1) The blade wobbled badly toward and away from the woodworker during the cut, in the area around the weld. Consequently, the blade bites into the cut then backs away, then bites again, on each revolution of the blade. The cutting process feels like an impact wrench, not a nice continuous cutting. My band saw is adjusted properly (Rikon 10-325). I spent hours trying to re-adjust, thinking it was the saw, not until later checking and researching and realizing it was the blade that has the defect. The stock blade and my new WoodSlicer blade don't do this wobbling nearly as bad. 2) Also, the blade was 1/4-inch too long and so I couldn't back off the tension enough to get to flutter mode. I hear these blades wobble due to the welding process used by the manufacturer. If the problem isn't confined to the useless blade I purchased, buyer beware.
1 - 2
Back to top
©2014 by Woodcraft Supply LLC