Drill Bit Stop Collars-7 Pc. Set

Comments about Drill Bit Stop Collars-7 Pc. Set :

I used one of the drill bits. The screw broke the second time I secured it on the bit. It was so very difficult to tighten it the fist time I used it. It is a great idea but these do not work well. I can not recommend these drill bit stops to anyone!

Comments about Drill Bit Stop Collars-7 Pc. Set :

Fits my Craftsman band saw perfect. My bandsaw is 21 years old.And Woodcraft was the only company that had one te fit. Thank you

Comments about Drill Bit Stop Collars-7 Pc. Set :

A lot of reviews complain about these being too stiff to use. Has anybody who had trouble getting one of these to clamp tightly tried grinding some material off the hinge side of the ring? With enough material removed, even the flimsiest set screw should clamp it tight.

Comments about Drill Bit Stop Collars-7 Pc. Set :

lot better for stopping drills at right length than a piece of tape wrapped around the drill bit.

Comments about Drill Bit Stop Collars-7 Pc. Set :

Five of the pack of seven worked as designed. Two did not. Unfortunately those 2, 5/16 and 3/8 are the two I need most. No matter how hard I turn the set screw with the allen wrench they do not tighten. All I ended up with is a rounded off allen wrench.

Comments about Drill Bit Stop Collars-7 Pc. Set :

Previously used blue tape for setting my bit depth but had lots of dowel holes to drill at exact depths. These stop collars fit and worked fine.

Comments about Drill Bit Stop Collars-7 Pc. Set :

Unfortunately, the one collar that I really needed does not quite fit the bit (it's slightly too large for the bit, even though it's -supposed- to fit) and there's not enough give for it to work, so this set turned out to be a waste for me.

Comments about Drill Bit Stop Collars-7 Pc. Set :

Most everyone has had good luck with these, but only some of the collars in the pack worked for me. I made sure I was using the correct collar for the 1/4" bit when I looked these over and found it wouldn't clamp on the bit no matter how hard I cranked the allen wrench. I even second guessed myself when it wouldn't clamp and checked again. I wanted these to replace the set screw type I've had for years but sent them back and asked for a return in the way of Gift Card.[...] Sometimes things just don't pan out like you'd want; I'm still using my old set.

Comments about Drill Bit Stop Collars-7 Pc. Set :

I make game boards and need to drill the holes just at the right depth. This product is great for that and the ring never sliped up or down once

Comments about Drill Bit Stop Collars-7 Pc. Set :

Very nice solution to drilling several holes to a certain depth....... Wish they came in a case...