Save $50 on Freeman Combo Kit
Includes a 2" Brad Nailer and 1" Micro Pinner.
Buy Now $69.99
WoodRiver® Universal Mobile Base Kit
Save $13 and go mobile with this Mobile Base Hardware Kit.
Now Only $49.99
Pizza Time! Save $3 On This Pizza Kit
This heavy-duty Pizza Cutter features a 2½" stainless steel blade.
Make Yours! $9.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Excellent Router Bit!
WoodRiver Lock Miter Router Bit 1/2" Shank
Forget all the reviews here that under-rate this router bit because it doesn't have instructions!
Have you ever seen instructions with any other router bits? Absolutely not.
These are designed for professionals and professionals should already know how to use them or should be able to figure out how to use them.
I'm a DIYer and it took me about 5 minutes to get this zeroed in and cutting perfectly.
One thing you have to keep in mind is if you are using multiple pieces of stock, they all must be exactly the same thickness otherwise, you'll need to constantly re-adjust the bit.
It's recommended to run all your stock through a jointer to get them exactly the same thickness. You can then keep running board after board without adjustment.
I made dozens of cedar beams with this bit and they turned out perfect.
Yes, I would recommend this to a friend
Set up tip
No instructions with the bit, nor do they sell a set up jig. Found a very helpful site to set up, took about 30 minutes to get it set up after that. Keep in mind it was the first time I ever used a router table so I had that learning curve as well here is the site good luck.
It is a love /hate relation ship
I have been pumped to use this but since I purchased it a couple months ago. Went to set it up and zero instructions from woodcraft is to be found. It was a educated guessing game. All said and done made my own setup block.
No, I would not recommend this to a friend
This is a great tool for mitered corners. Eliminates the need for splines or biscuits on corners. Suggest reading how to setup this tool before use.
Just what I was looking for
Haven't used yet but should do the job
Setup is critical
I used the bit to make a oak shelf. The joint is strong but the setup is critical to getting a closed joint when glueing the two parts together.
This bit works great
Virginia Beach, VA
This bit is easy to use, set the fence and bit position and make both cuts, couldn't be easier. Minimal setup difficulty, got the cut I needed on the first try. This bit makes a strong joint that I will use often, and for the price it can't be beat!
great bang for the buck
I can't believe an instruction set is not offered with this bit. There are instructions to be easily found for similar bit sets out there. HINT: Use a straight-edge piece of wood stuck to the workpiece with double sided tape to ride the router fence, for the cut where the workpiece lies flat on the router table - this is a must.
Woodriver Bits are great values
This bit makes short work of locking miters. I have purchases almost 30 Woodriver bits over the last two years and every one has met the quality expectations I thought it would.
West Palm Beach, FL
I have user this tool making decorative boxes and the joint never needs fasteners, the configuration of the cut ensures that the joint will stay together. I have a tool box made 15 years ago with this tool that has no fasteners and is still going strong
1 - 10
Back to top
©2014 by Woodcraft Supply LLC