Mylands High Build Friction Polish

Comments about Mylands High Build Friction Polish :

For lathe work I apply at about 1,000RPM after I put on a sanding sealer. Makes for a beautiful finish.

Comments about Mylands High Build Friction Polish :

Use to finish pens

Comments about Mylands High Build Friction Polish :

Great for pens.

Comments about Mylands High Build Friction Polish :

Don't let it build up on fingers. It will dry and crack shin. So wash hands after use

Comments about Mylands High Build Friction Polish :

I make duck calls on my lathe and Mylands High Build Friction Polish makes a high level finish/sealant. Dries hand, mirror gloss and brings out the grain of the wood as good as it gets. However, you need a steady hand and watch for over doing it so it dries evenly.

Comments about Mylands High Build Friction Polish :

this product is great for wood turning projects, just takes a few coats to get a really lustrous sheen, add more coats to achieve a glosst smooth finish

Comments about Mylands High Build Friction Polish :

I use Mylands HBF Polish on my spinning tops because it dries fast, looks great, and gives me a finished product when I take the top off the lathe.

Comments about Mylands High Build Friction Polish :

This friction finish is easy to apply on the lathe and in my opinion works best at higher speeds where the friction helps to "burn in" the finish. It doesn't leave the project with a plastic appearance, but brings the natural beauty of the wood to a nice luster.

Comments about Mylands High Build Friction Polish :

apply many coats at high speeds

Comments about Mylands High Build Friction Polish :

If you try to apply multiple coats it will begin to streak. You can actually feel them. If they included proper instructions (even bad ones) this possibly could have been avoided. A single coat applied with a very smooth cloth is what I recommend.