New Festool TS 55 REQ Plunge Cut Saw
Festool has made the best plunge saw better.
JET Benchtop Spindle Sander
Save $100 on this customer favorite!
Save $50 on HTC-3000 Mobile Base
Fully adjustable, holds up to 700 lbs.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Excellent high speed rotary bits
Kutzall Silver Coarse Grit Carving Burr, 1/8" Shank, 4 piece
These bits allow the user to hand carve even the hardest woods with speed and precision. These bits allow me to do in just a few minutes what might normally take hours using inferior or tools of comparable value that do not have the engineering of these Kutzall bits.
Yes, I would recommend this to a friend
Images shared by
A hand made cedar flute
Made with Product, Picture of Product, Using Product
much better than the store brand !
We bought these with the dust collector box which also came with a few cut all types of bits . These were by far the superior . The store brand lost much of its small cutting edges in the first few minuets . These however were used for hours with no visible wear , and they are well centered . We are great advocates of the no name brands usually , here however we would tell you buy only the name brand . Good stuff inside! You will have years of carving pleasure from this set .
pretty good little burrs
the shores of new jersey
i am a knife maker. i use these burrs on rough work for the knife scales. just be careful around hardened steel the burr does not fair well.however, on wood they work as well as a rasp, takes extra material off very fast.
Carving Burr set
Heber Springs, AR
I use the burrs for roughing out small three dimensional wood carvings. Especially handy for hard to get at places.
1 - 4
Back to top
©2013 by Woodcraft Supply LLC