Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Great tool for the money!
Kansas City, MO
I was looking for a drill guide that could be used for wider surfaces than edge joinery, and this was ideal. I used this to put 3/8" diameter dowels in 3/4" oak (built a decorative rack with dowels for hanging small tools). Short of using an actual drill press, this economical device delievers the cleanest and most perpedicular drilling in an open flat surface I have ever seen or made. With the centering awl that establishes and maintains your mark and the transparent base, you can't miss. Unless you are really steady-handed, be sure to clamp it down.
Yes, I would recommend this to a friend
Needs more guides
I was ready to buy until I saw there was not any guides for the sizes I need. They need to include 3/32, 1/8, and possibly a guide not drilled that you could put the in between sizes. Look like a very simple and good tool.
Great for threaded insert installs too
Great for drilling holes for threaded inserts and also for screwing them in straight. The T wrench they sell here will fit right in.
always had trouble getting straight holes.
[...]nice Drill Guide
Rall County, MO
I haven't used it yet, but it appears to be the ideal tool for small jobs.
This is just what I needed to do the job
I will be using this to make floating shelves in my house so I needed a guide to drill a straight hole in some barn wood that I have. I think this will work just fine for what I am doing.
Would not buy again
Bearing has enough slop in the plastic housing that a perpendicular hole is difficult to obtain.
No, I would not recommend this to a friend
Well designed and thought product
A good example that a good planned, well designed and manufactured product can also be affordable and simple to use.
Handy little tool
Jason the Web Guy
I was considering a small drill press.. but would only need it for one project.. And didn't trust my skills at making perfect 90 degree holes.. Found this to fit the bill.. saving money, which keeps the wife happy.
The bushings are not a perfect fit.. I addressed this by using a small piece of paper around the inside.
i cann't drill anymore without !!
a great help by upgrading my airplane.
modifications on my Zenair CH 601 XL
Greetings from Belgium
1 - 10
Back to top
©2014 by Woodcraft Supply LLC