Close
Sign Up Today and Get a Special 10% Off Coupon

StopLossBags, 4 Pack

Item #160882 Unbranded
$11.99
Qty.   or Add to Wish List

 
4.5

(3 reviews)

Read Reviews | Write a Review


Product Information:

Evaporation and oxidation begin when you first open a can of finish, and each time you open the can it gets worse, eventually rendering any remaining finish unusable. Transferring the finish into one of our StopLossBags™ and squeezing out the air means the finish can be used to the last drop. StopLossBags™ are made from a special 3 ply wall, each ply being a different material and thickness to prevent transpiration of water, alcohol, organic solvents and oxygen. Finish stays in, oxygen stays out, squeeze out only what finish you need and the rest of the finish in the bag stays fresh until you need it. It’s really that simple. When purchasing StopLossBags™ for the first time, we recommend you purchase either the Funnel (#160883) or the Filler/Adapter Tube (#160884) as well for easier transfer of finish to the bag.
  • StopLossBags™ prevent finish from going bad
  • Special three-ply bag wall keeps finish in and oxygen out
  • More usable finish saves money
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.7

    (based on 3 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    • Ease of use (2)

    Cons

    Best Uses

    Displaying reviews 1 - 3

    Back to top

    |

     
    5.0

    It's in the bag!

    By  Makin' Sawdust

    from Whitakers NC

    About Me

    Pros

    • A Money Saver
    • Ease of Use
    • Easy Cleanup
    • Easy mixing

    Cons

    • None

    Best Uses

    • Obviously Finish Storage

    Comments about StopLossBags, 4 Pack :

    Finally finished the quart of finish that I wrote about in my initial review of this product and felt that an update was needed. There was no appreciable loss of finish in the bag. There was, of course, a very small amount of dried finish on the outside of the spout which occurred when decanting and when squeezing out the air prior to resealing and a small amount on the inside of the spout which I covered in my prior review. I was able to use the entire quart of finish, right down to the very last drop. Based on my normal rate of use, the StopLossBag saved abound 25% of the finish. The bag paid for itself with its very first usage. It is now clean and waiting for me to refill it.

     
    5.0

    Great Product!

    By  Blake

    from Whitakers NC

    About Me

    Pros

    • a real money saver
    • Does what is claimed
    • Ease of Use
    • Easy Mixing No Sticks

    Cons

    • none

    Best Uses

    Comments about StopLossBags, 4 Pack :

    I just used some wipeon poly that I had put into the StopLossBag on Jan 19, 2015. There was a very small ring of solidified finish at the very top of the tube. I picked it out with a toothpick and went to work. Mixing is easier and the product does what is claimed. What more could you ask for?

     
    4.0

    So, they stole my idea!

    By  MDWoodArt

    from MI

    About Me

    Pros

    • Easy to fill

    Cons

    • Should Be Gravity Flow

    Best Uses

    • At The Lathe

    Comments about StopLossBags, 4 Pack :

    I throw away more finish than I use. Some finish I use all the way thru, but working on the lathe doesn't require a lot and my finish hardens before its use is up. There is a product called Bloxygen that is simply argon gas that you spray into the finish can before you close it. It is heavier than air and pushes oxygen out of the can prolonging the shelf life. It can get expensive as many times I open and close those cans. Months ago, my father was receiving at home IV antibiotics. I though the empty IV bags without air would be perfect for wood finish. I just didn't think any more into it after I realized I would need some way of injecting the finish into the bags. So I saw these in woodcraft shortly after and had to try them. So far so good. But I still say they need to be hung like an IV and have a valve and hose from each bag. Now, time is needed to see how the finishes hold up in the bags.

    Displaying reviews 1 - 3

    Back to top

    |

     
    We've Found These Items Related to: StopLossBags, 4 Pack
    Woodcraft Product Experts Recommend: