Close
Sign Up Today and Get a Special 10% Off Coupon

Kreg Jig K5 Pocket Hole System

Item #158631
$139.99
Qty.   or Add to Wish List

 
3.5

(2 reviews)

Read Reviews | Write a Review


Product Information:

The Kreg Jig® K5 incorporates the best features of older models while adding a host of improvements. K5 offers a tool-free workpiece clamping system with a ratcheting clamp follower and front mounted ergonomic actuating handle. Still the jig uses the same removable drill guide block to maintain compatibility with the Micro Pocket Drill Guide™ and Kreg Jig® HD. Two large support wings can be attached quickly and easily to the sides of the K5, base providing long workpieces with solid footing. Plus there’s a large storage compartment under the lid of each wing where you can keep your bits, screws and accessories at hand but out of the way. Add in a batch of other great features like a swiveling dust-collection port, spring-loaded indexing pin for the drill guide block and a foolproof depth collar setup gauge, and you have quite simply the most advanced Kreg Jig yet!When you’re ready to create Kreg Joints, the K5 makes it simple. Select your screw based on thickness of your wood, set the stop collar using the Depth Collar Setup Gauge, pull the spring-loaded pin to adjust the Drill Guide Block, set the workpiece clamp and you’re ready to go.Includes: Kreg Jig K5 base, drill guide block, two extension wings, dust-collection port, face frame stop, depth collar gauge, stepped drill bit, driver bit, stop collar, hex key, user guide, starter screw and plug pack.


  • New front actuated ratcheting clamp mechanism features tool-free adjustment

  • New spring-loaded pin to index drill guide block position and swiveling dust port

  • New depth collar setup gauge and material support wings with integral storage area

  • Original three-hole drill guide block with 9/16", 7/8", and 1-7/16" center spacing

  • Workpiece thickness settings: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2"

  • California Residents: Click here for Proposition 65 information.

     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    3.5

    (based on 2 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    Cons

    Best Uses

    • In the workshop (2)
    • Reviewer Profile:
    • Avid do-it-yourselfer (2)

    Displaying reviews 1 - 2

    Back to top

    |

     
    5.0

    Easy to use.

    By  Bill G.

    from New Cumberland, PA

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use

    Cons

    • None

    Best Uses

    • Home Repair
    • In The Workshop

    Comments about Kreg Jig K5 Pocket Hole System :

    As mentioned by a previous reviewer, there is an error in the manual listing 5/8 as the setting for a 3/4" board. However the instructions also state that the settings are to be set equal to the board thickness. The jig works great. It is easy to set and easy to use. I especially appreciated the side wings that were added as support for wider boards. This eliminates the need to make a fixture for that support, an advantage over the K4. The wings also conveniently serve as storage for the K5 tools. The new design of the clamping mechanism makes for quick changes for board thickness. I used it to make a cornice for our bay window (photo attached).

     
    2.0

    Watch out the chart has an error

    By  Shopmaster

    from Kansas

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    Best Uses

    • In The Workshop

    Comments about Kreg Jig K5 Pocket Hole System :

    Watch out when using this chart. It says to use the 5/8 mark for 3/4 wood instead of the 3/4 mark. I did use the 5/8 mark and ruined an expensive table top because the screws came through

    Displaying reviews 1 - 2

    Back to top

    |