Close
Sign Up Today and Get a Special 10% Off Coupon

MILESCRAFT JointPro Doweling Jig

Item #158281
$58.75
Qty.   or Add to Wish List

 
2.5

(2 reviews)

Read Reviews | Write a Review


Product Information:

The Milescraft® JointPro™ Deluxe Doweling Jig is a high quality tool with interchangeable metal guide bushing blocks and two self-clamping fixtures for perfect alignment of corner, surface or edge joints. Drill bits, drill stops and dowel pins are not included.


  • Clamp both boards simultaneously for precise hole alignment

  • Drill up to six matching holes per setup for stronger joints

  • Up to three 1/4", 5/16" or 3/8" holes using hardened steel bushing blocks

  • Includes detailed instructions to produce corner, edge and surface joints

  • Drill bits, drill stops and dowel pins are not included

  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    2.5

    (based on 2 reviews)

    50%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 2

    Back to top

    |

     
    4.0

    Better than the competition

    By  Joe

    from Leesburg, VA

    About Me Casual Do-It-Yourselfer

    Pros

    • Easy To Use
    • Versatile

    Cons

    • Not 100 Centered

    Best Uses

    Comments about MILESCRAFT JointPro Doweling Jig :

    The other jigs I found that are as useful and easy to use as this broke easily. I have put this through its paces making several projects involving hundreds of holes drilled. It has never let me down, and the joints are amazing. I tried to break 2 pieces apart after gluing and clamping, and the actual board broke before the joint even cracked. The only real downside is that the holes are not 100% centered, being off my a millimeter or so. However, it doesn't actually matter in practice, and a piece of construction paper folded twice fixes that. Also, you will want to get collared drill stops with the screw tightening the collar to itself, not sticking into your drill bit. It's better.

     
    1.0

    Bad craftsmanship

    By  Ravenwine

    from Houston, TX

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    Best Uses

    Comments about MILESCRAFT JointPro Doweling Jig :

    The first one I bought had a crack in the aluminum frame and I took it back. The second one looked ok, but when I tightened the clamps, I noticed that two of the plastics clamp-pads were cracked. Can't be sure if it was me, but I don't think I over-tightened. They are made from inexpensive polyolefin, that should not have been used for that purpose. The clamp tip put gouges in my carefully planed boards. Very disappointed for the price I paid. I didn't notice the breaks until after I used it, now afraid to take back for a second time.

    Displaying reviews 1 - 2

    Back to top

    |