Close
Sign Up Today and Get a Special 10% Off Coupon

Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL

Item #154275
$139.99
Qty.   or Add to Wish List

 
5.0

(2 reviews)

Read Reviews | Write a Review


Product Information:

The Ultimate in flush trim bits – if you use a lot of templates or use a router bit to flush trim, then this is the best that you can buy. These Ultimate Flush Trim Bits are perfect when working with templates or when using a router to flush trim matching wood surfaces. Whiteside’s compression spiral design, with a 7/8" diameter bearing guide makes this bit easy to use in the router and produces a superior quality trimmed edge. The Ultimate Flush Trim series brings industrial engineered bits, previously manufactured for CNC machines, right into your shop. This Flush Trim Bit has a bearing on the end of the bit allowing for a template to be placed on bottom side of the piece to be duplicated. The 7/8" carbide compression design creates a high shear angle for perfect cuts every time.


  • Compression spiral technology

  • 7/8" diameter for higher shear angles

  • Novice approved for creating perfect edges

  • Flush trim design with bottom bearing


  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    5.0

    (based on 2 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 2

    Back to top

    |

     
    5.0

    What a bit!

    By  Scott the Hacker

    from NE Colorado

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Powerful

    Cons

    Best Uses

    • In The Workshop

    Comments about Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL :

    I consider myself an advanced beginner. I gulped and sprung for this bit after being dissatisfied with some other non spiral pattern and flush trim bits I had been using. I have a 3 1/4hp PC router mounted under a cast Bench Dog table in a BD lift. This bit is amazing. I have used it on 4/4 and 6/4 (planed a bit) red oak and, 4/4 cedar. It cuts cleanly, quickly and smoothly. This bit, in the setup I have, is amazing. The only time you will be sorry is the moment you pay for it. After that it's all good. I hope to see one with a bit longer cutting length, maybe 2", in the future. I won't hesitate to buy it.

     
    5.0

    Excellent Trim Bit

    By  Harper Guitars

    from Indiana

    About Me Professional

    Pros

    • Little To No Kickback
    • Smooth Trim Bit

    Cons

    • None

    Best Uses

    • Patterns Template Work

    Comments about Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL :

    Use for transfering guitar body and neck shapes to hardwood.

    Displaying reviews 1 - 2

    Back to top

    |