Close
Sign Up Today and Get a Special 10% Off Coupon

Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL

Item #154275 Whiteside
$139.99
Qty.   or Add to Wish List

 
5.0

(2 reviews)

Read Reviews | Write a Review


Product Information:

The Ultimate in flush trim bits – if you use a lot of templates or use a router bit to flush trim, then this is the best that you can buy. These Ultimate Flush Trim Bits are perfect when working with templates or when using a router to flush trim matching wood surfaces. Whiteside’s compression spiral design, with a 7/8" diameter bearing guide makes this bit easy to use in the router and produces a superior quality trimmed edge. The Ultimate Flush Trim series brings industrial engineered bits, previously manufactured for CNC machines, right into your shop. This Flush Trim Bit has a bearing on the end of the bit allowing for a template to be placed on bottom side of the piece to be duplicated. The 7/8" carbide compression design creates a high shear angle for perfect cuts every time.


  • Compression spiral technology

  • 7/8" diameter for higher shear angles

  • Novice approved for creating perfect edges

  • Flush trim design with bottom bearing


  • Shipping / Billing Info:

    This product ships direct from the manufacturer:
    • Your order will ship in approximately 2-4 business days.
    • This product is considered special order. Your account will be charged when you place your order.
    • Express or overnight shipping is not available for this product.
    • Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.


    Return Information

    Returns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.

    If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.



    Warranty Information

    Because this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.

    Whiteside Product Guarantee:

    All Whiteside tools are warranted to be free from defects in workmanship & materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.


    California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    5.0

    (based on 2 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 2

    Back to top

    |

     
    5.0

    What a bit!

    By  Scott the Hacker

    from NE Colorado

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Powerful

    Cons

    Best Uses

    • In The Workshop

    Comments about Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL :

    I consider myself an advanced beginner. I gulped and sprung for this bit after being dissatisfied with some other non spiral pattern and flush trim bits I had been using. I have a 3 1/4hp PC router mounted under a cast Bench Dog table in a BD lift. This bit is amazing. I have used it on 4/4 and 6/4 (planed a bit) red oak and, 4/4 cedar. It cuts cleanly, quickly and smoothly. This bit, in the setup I have, is amazing. The only time you will be sorry is the moment you pay for it. After that it's all good. I hope to see one with a bit longer cutting length, maybe 2", in the future. I won't hesitate to buy it.

     
    5.0

    Excellent Trim Bit

    By  Harper Guitars

    from Indiana

    About Me Professional

    Pros

    • Little To No Kickback
    • Smooth Trim Bit

    Cons

    • None

    Best Uses

    • Patterns Template Work

    Comments about Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL :

    Use for transfering guitar body and neck shapes to hardwood.

    Displaying reviews 1 - 2

    Back to top

    |