Save $30 on QuikBENCH
Versatile, lightweight, strong, you'll find hundreds of uses for your QuikBENCH.
Now Only $99.99
RIKON Slow Speed Grinder $99.99
Keep your tools safe and sharp.
Save $40 Today!
Save $35 on this Wood Rack
Add a Portamate Wood Rack to your shop.
Buy Now $39.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Arts & Crafts TV Stand Downloadable Plan
The plans are detailed but refer to a Corbel Pattern on page 73 that is not included in the downloadable product.
Yes, I would recommend this to a friend
You can build it from these plans.
I built this unit - the plans are adequate, if not good. I would recommend reading 3 times to make sure you understand the entire project's composition.
-Leg composition was a little annoying, I'd have rather just glued up full pieces and then cut mortises, but their method worked perfectly
-Tedious amount of gluing full size stock as edge banding to the plywood carcass, but better than gluing up panels of hardwood
-I left off the back piece (unit is STRONG without it)
-Heavy push on the 'suggested tools and hardware', IMO, but if you need that guidance, it's there
-Excellent tips along the way
-Dimensioned well, just a lot of pieces (Quite the cut list - stay organized and understand each piece's purpose)
-Step-by-step to say the least - very good if you want a hand held project
-Great excuse to add a few more tools to the shop!
Corbel templates are available online: http://www.woodcraftmagazine.com/magpatterns/TVtable/TV_stand.pdf.pdf
If I built the unit, the plans did their job and then some!
Images shared by
Finished unit - Hardware was backordered
Made with Product, Picture of Product, Using Product
Nice graphics, but incomplete
The plans refer to page 73 for the corbel template. Page 73 not included.
1 - 3
Back to top
©2015 by Woodcraft Supply LLC