Close
Sign Up Today and Get a Special 10% Off Coupon

Veritas Straight Grinding Jig

Item #153366
$28.99
Qty.   or Add to Wish List

 
4.0

(3 reviews)

Read Reviews | Write a Review


Product Information:

The VeritasĀ® Grinding Jig solidly clamps and perfectly aligns the tool to be sharpened with its alignment pin system. It slides back and forth across the tool rest groove on the VeritasĀ® Grinder Tool Rest, but it also has riding ledges which allow it to be used with other tool rests. Clamps solidly and aligns perfectly to tool to be sharpened.


  • Use on 6" and 8" grinders and belt sanders

  • Also works with other tool rests


  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.0

    (based on 3 reviews)

    67%

    of respondents would recommend this to a friend.

    Pros

    • Easy to use (2)

    Cons

    Best Uses

    • Reviewer Profile:
    • Avid do-it-yourselfer (3)

    Displaying reviews 1 - 3

    Back to top

    |

     
    5.0

    Good accessory

    By  n3il

    from Seattle

    About Me Avid Do-It-Yourselfer

    Pros

    • Accurate
    • Easy To Use

    Cons

    Best Uses

    • Grinding

    Comments about Veritas Straight Grinding Jig :

    I bought the Veritas tool rest to machine new bevels on my straight chisels and plane blades. This jig makes straight grinding a breeze. Easy to set up and it slides from side to side with ease.

     
    3.0

    Not for Most Chisels

    By  dunnz

    from Hudson WI

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    Best Uses

    Comments about Veritas Straight Grinding Jig :

    If you are planning on using this guide to sharpen most of your chisels you might think again. There is a description for sharpening Japanese or western butt chisels on their website & in the instructions. However there is no clear description as to its set up to do so. All of my attempts at different combinations have concluded that there is no way to do this and use the controls built into the system. Basically you cannot use the bar that fits into the slot in the companion tool rest. Other combinations cause the jig to bind or jump the intended path that is the idea behind this jig in the 1st place. I have contacted Lee Valley and they had no immediate answer. I am now waiting for the designer to call me with a solution. Keep in mind their honing guide has some of the same issues with short or US chisels. You may also encounter problems with some block plane and cabinet plan irons as they can be too short to use the square registration system. A fresh look at the design could make this jig a very useful as well as universal tool.

     
    4.0

    I like it

    By  RBDaves

    from Aguanga, CA

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use

    Cons

    Best Uses

    • Sharpening

    Comments about Veritas Straight Grinding Jig :

    Sharpening aid

    Displaying reviews 1 - 3

    Back to top

    |