Close
Sign Up Today and Get a Special 10% Off Coupon

KREG Deck Jig System

Item #150881
$79.99
Qty.   or Add to Wish List

 
3.5

(9 reviews)

Read Reviews | Write a Review


Product Information:

The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws.

With the Kreg Deck Jig and a few simple tools you already own, you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws. Works great with composite deck boards and ACQ treated lumber. Also works with native softwoods such as redwood, cedar and pressure-treated pine. Even works with certain tropical hardwoods like ipe, red balau, and ironwood. Easy-grip handle gives you a secure hold and complete control over each and every joint. Hardened steel drill guides keep special stepped bit and driver bit at precise, optimal angle. Three separate drill guides let you install deck boards in a variety of hard-to-reach areas. Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life.The Deck Jig System includes: Deck Jig, 6" Deck Jig drill Bit with stop collar, 6" KTX square driver bit with stop collar, 5/16" spacer rings (3), 1/4" spacer rings (3), Protec-Kote deck screws (100), Instructional DVD & Durable carrying case

  • Create an incredibly strong wood-to-wood bond through precisely placed self-tapping screws.
  • Works great with composite deck boards and ACQ treated lumber.
  • Easy-grip handle gives you a secure hold and complete control over each and every joint
  • Hardened steel drill guides keep special stepped bit and driver bit at precise, optimal angle.
  • Three separate drill guides let you install deck boards in a variety of hard-to-reach areas.
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    3.4

    (based on 9 reviews)

    56%

    of respondents would recommend this to a friend.

    Pros

    • Effective (5)
    • Lightweight (5)
    • Versatile (4)
    • Well built / quality (2)
    • Sturdy case (2)

    Cons

    • Flimsy construction (3)

    Best Uses

    • Small projects (6)
    • Home repair (4)
    • Large projects (2)
    • Reviewer Profile:
    • Avid do-it-yourselfer (6), Casual do-it-yourselfer (2)
    • Primary Use:
    • Personal (7)

    Displaying reviews 1 - 9

    Back to top

    |

     
    5.0

    Great idea....

    By  Bill

    from Ringgold, GA

    About Me Avid Do-It-Yourselfer

    Pros

    • Lightweight
    • Versatile
    • Works Effectively

    Cons

    • Collar On Drill Bitdrive

    Best Uses

    • Home Repair
    • Large Projects

    Comments about KREG Deck Jig System :

    Very useful...no unsightly screw heads visible.

    • Primary Use:
    • Personal
     
    2.0

    poor design

    By  Woodworker69

    from Seaford, VA

    About Me Avid Do-It-Yourselfer

    Pros

    • Nice Idea

    Cons

    • Not Effective

    Best Uses

    • Home Repair

    Comments about KREG Deck Jig System :

    This product will not work on composit decking for it breaks up the boards and will not be able to hold the decking. On treated lumber still not a great holding power.Not worth the money.

    • Primary Use:
    • Personal
     
    5.0

    Easy to use

    By  Airlessdave

    from Onekama MI.

    About Me Avid Do-It-Yourselfer

    Pros

    • Lightweight
    • Strong
    • Sturdy case
    • Versatile
    • Works Effectively

    Cons

    Best Uses

    • Home Repair
    • Small Projects

    Comments about KREG Deck Jig System :

    Included video covers most uses of jig, left no questions after viewing.

     
    5.0

    Kreg Deck Jig

    By  All hands on deck

    from Oswego, Ny

    About Me Casual Do-It-Yourselfer

    Pros

    • Lightweight
    • Strong
    • Sturdy case
    • Versatile
    • Works Effectively

    Cons

    Best Uses

    • Home Repair
    • Large Projects
    • Small Projects

    Comments about KREG Deck Jig System :

    Great tool, does what is advertised. The only issue is it takes forever to install the boards. Would be great if they sold as a pair because it just takes forever to drill, place screw and then screw in. No fault of equipment just the process. Very nice result of no screws showing on a new deck!

    • Primary Use:
    • Personal
     
    4.0

    Great Product

    By  Joe

    from St Clairsville, Ohio

    About Me Casual Do-It-Yourselfer

    Pros

    • Versatile
    • Works Effectively

    Cons

    • Flimsy Construction

    Best Uses

    • Small Projects

    Comments about KREG Deck Jig System :

    I expected a more sturdy built tool from Kreg. It worked well, but if I had a much bigger deck, I think that it may have been worn out at the end of a larger job.

    • Primary Use:
    • Personal
     
    1.0

    needs to be made stronger

    By  peter

    from ny

    About Me Avid Do-It-Yourselfer

    Pros

    • Lightweight

    Cons

    • Flimsy Construction

    Best Uses

    • Small Projects

    Comments about KREG Deck Jig System :

    not like the other pocket hole jigs needs to be made stronger flexes used on 1 deck will not use again

    • Primary Use:
    • Personal
     
    2.0

    I think it needs work

    By  Apacheone

    from New York

    About Me Professional

    Pros

    • Lightweight

    Cons

    • Flimsy Construction

    Best Uses

    • Small Projects

    Comments about KREG Deck Jig System :

    Jig is easily twisted when pulling out a drill/driver bits jig will break if care is not taken. I also question the strength of the Trex material when drill from the sides there are other screw that preform better than the jig and the screws are inserted from the top leaving a small hole on the top small enough to make disappear after finessing the Trex material. I would not recommend this tool until it is made more durable and a little larger head on the screw and body is produce. I would also recommend when framing to use a 10 inch on center as oppose to a 12 or 16 on center for floor joists as the deflection with the Trex which could result in the premature failure of the fastener.I add 2x6 cross beams 10" on center with my deck for add support.

    • Primary Use:
    • Business
     
    4.0

    Pleasantly surprised

    By  Bill

    from Boulder, CO

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    Best Uses

    Comments about KREG Deck Jig System :

    This was my first deck project, so I'm no expert. However, I was quite pleased with the results. The first boards were a royal pain, drill, then drive, move around the spacers, do it again on the other side of the board. That's how the video says to do it. Once I realized that the pilot holes do not extend into the rafters, I started drilling all the pilot holes for two boards at once. Then, using the spacers, drove all the screws toward the spacers, then switched to the opposite side and drove all those screws. It was much faster, and the spacing was dead even throughout the deck. Keep in mind that unlike other blind fastener systems, if an inside board needs replacement, you don't have to disassemble the whole deck to get to it. I don't know if a pro would like this system, but I think it works well for a beginner.

    • Primary Use:
    • Personal
     
    3.0

    Just Finished First Deck with This

    By  BigJim

    from Louisville, KY

    About Me Avid Do-It-Yourselfer

    Pros

    • Simple to use
    • Works Effectively

    Cons

    • Poor Quality Bit
    • Slow Going

    Best Uses

    • Small Projects

    Comments about KREG Deck Jig System :

    [...] I was anxious to get going after watching the very detailed instruction videos.Using good, straight premium treated decking material I jumped right in. Everything went well, the product worked as advertised, but WOW! Compared to my former projects using surface nailing and deck screws this process takes a LOT of time! By the end of the first day I was quite disheartened to see that I had only gotten about half as far as I normally would. Good results - looks fantastic, yes. But allow MUCH more time than you think you will need.Then, my second disappointment. Just getting started early the next day I was drilling a hole and the pilot bit just snapped in half! This after less than 600 holes - and I did NOT bind or mistreat the bit in any way. While every box of screws comes with a screw bit, I realized that I should have ordered at least one extra pilot bit. [...]So here I am with a half a deck and half a bit. So while the jig is fine, I am NOT pleased with Kreg right now, to say the least.

    • Primary Use:
    • Personal

    Displaying reviews 1 - 9

    Back to top

    |