See everything on sale inside our February Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog anytime!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
I like my Anchorseal
fisher of men
Anchorseal 2 Green Wood Sealer, Gallon
I am using the product to seal a number of fresh cut hard woods which I will let slowly dry outdoors under cover. These pieces will be used for making a number of different wood turning projects.
Yes, I would recommend this to a friend
So Far, So Good
I use it to prevent checking on turned green wood bowls.
I use product all the time.
I use the product for rough turned green wood projects.
Best sealer I've ever used.
As a turner, I use only standing dead natural cured wood. Anchor Seal 2 prevents end grain checks on rough cut wood. It applies evenly and is superior to other sealers I've tried.
Thus far I am very happy and satisfied.
Due to the tornado that came only a couple of days after this shipment arrived, the Anchoeseal 2 has been put to use as we salvaged good pieces of turning wood out of the debris.
I had started to order from another company but chose you because of the difference in shipping costs. I am very happy with my decision.
I would buy this product again
upper peninsula, michigan
Good product for what I need.
will use this as long as i turn bowls
BROCKVILLE ONTARIO CANADA
I USE ANCOR SEAL TO COAT ROUGH OUT GREEN WOOD BOWLS THEN LET THEM DRY FOR 8 TO 12 MONTHS. WITH A LOT LESS CRACKING OR SPLITING BEFORE FINISH TURNING
Good Stuff !!
Awesome stuff !! I use this on a regular basis,all my wood that is cut and is drying has Anchorseal applied to the ends. Very little checking occurs!!
Better than most!
Pisgah Forest NC
Apply liberal coat to ends of fresh cut logs to retain moisture and prevent checking.
kevin with the woodmizer
i own a portable sawmill and a chainsaw mill capable of cutting 6 foot wide slabs. i've experimented with this sealer over the years and it does make a big difference in checking. i seal the end of the log as soon as possible after felling the tree. i typically cut 2", 3", 4" thick slabs it has almost no checking at all, on slabs of the same log that i didn't apply it to the ends, i had 6" to 10" checks on each end. that's a lot of wasted wood. a gallon goes a long way. i use a cheap paint brush and bottom off a plastic bottle to pour it into and apply it. never rinse the brush out, just let it dry. when i use it again, it quickly becomes soft and like new again.
1 - 10
Back to top
©2016 by Woodcraft Supply LLC