Earlex Spray Station HVLP
Get a better finish on your next project.
Buy Now $299.99
TANOS T-LOC IV Cooler
This insulated Systainer connects to all of the Systainers in your shop!
K3 Electric Pressure Washer from Kärcher
Small, light, and very portable! As seen on T.V. It's dirt's mortal enemy.
Now Only $199.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 1
Back to top
Cuts Like Butter
Freud 97-156 Adjustable Rail And Stile 3-Pc Door Router Bit Set Bevel Panel W/Bc Round Rail 1/2" Shank
I just completed my first ever raised panel doors with this bit set and I'm extremely satisfied on how these bits preformed in the lightly figured walnut that I used. I cut the rails and stiles in one pass and the finished cut is very smooth, no sanding needed. I took 3 passes with the panel cutter and the finish is also close to perfect. The fit of the rails, stiles and panel is very tight, maybe a hair too tight. I may need to take a 4th pass on the panel taking a hair more off. The setup of the bits was not difficult for my first time doing raised panels. I followed the outstanding instructions in issue #221 of Fine Woodworking – Cope and Stick Tricks (page 68-71) and made one test cut with each bit. The instructions with the bits are very good and it even comes with a small DVD with video instructions. The overview on how to set your pre-routed wood dimensions is very good. My router table/fence is JessEm and my router is the Porter Cable 7518 – 3 ¼ hp. I cut the panel at 10,000 rpm (lowest setting) and the rail/stiles at 19,000 (second to the highest setting of 21,000)
I would highly recommend this bit set.
Images shared by
The Bits and the Completed Door
Made with Product, Picture of Product
1 - 1
Back to top
©2015 by Woodcraft Supply LLC