Sign Up Today and Get a Special 10% Off Coupon

Freud 97-156 Adjustable Rail And Stile 3-Pc Door Router Bit Set Bevel Panel W/Bc Round Rail 1/2" Shank

Item #150687 Freud
Qty.   or Add to Wish List


(1 reviews)

Read Reviews | Write a Review

Product Information:

Making double-sided doors has never been easier! Set contains Premier Adjustable Quarter Round Rail and Stile Bits with upper and lower profile cutters to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks.

  • Premier Adj Rail & Stile bits allows for double profile doors with variable thicknesses & long tenon
  • Perfect matching profile on all doors because it's the same set of router bits
  • Choose from a variety of material thicknesses, 5/8” to 1-1/4”.
  • Bits feature Freud's Perma-Shield coating that reduces heat and pitch build up along with rust
  • Freud's TiCo Hi-Density Carbide to maximize bit life and material finish
  • California Residents: Click here for Proposition 65 information.



    by PowerReviews

    (based on 1 reviews)


    of respondents would recommend this to a friend.

    Displaying reviews 1 - 1

    Back to top



    Cuts Like Butter

    By  A.J.

    from Charlotte, NC

    About Me Avid Do-It-Yourselfer


    • Easy To Store
    • Powerful


    Best Uses

    • In The Workshop

    Comments about Freud 97-156 Adjustable Rail And Stile 3-Pc Door Router Bit Set Bevel Panel W/Bc Round Rail 1/2" Shank :

    I just completed my first ever raised panel doors with this bit set and I'm extremely satisfied on how these bits preformed in the lightly figured walnut that I used. I cut the rails and stiles in one pass and the finished cut is very smooth, no sanding needed. I took 3 passes with the panel cutter and the finish is also close to perfect. The fit of the rails, stiles and panel is very tight, maybe a hair too tight. I may need to take a 4th pass on the panel taking a hair more off. The setup of the bits was not difficult for my first time doing raised panels. I followed the outstanding instructions in issue #221 of Fine Woodworking – Cope and Stick Tricks (page 68-71) and made one test cut with each bit. The instructions with the bits are very good and it even comes with a small DVD with video instructions. The overview on how to set your pre-routed wood dimensions is very good. My router table/fence is JessEm and my router is the Porter Cable 7518 – 3 ¼ hp. I cut the panel at 10,000 rpm (lowest setting) and the rail/stiles at 19,000 (second to the highest setting of 21,000) I would highly recommend this bit set.

    Displaying reviews 1 - 1

    Back to top