Close
Sign Up Today and Get a Special 10% Off Coupon

Forrest Woodworker II Saw Blade 10" x 48 Tooth

Item #150268
$144.99
Qty.   or Add to Wish List

 
4.0

(4 reviews)

Read Reviews | Write a Review


Product Information:

Forrest Premium Carbide Saw Blades cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade.They feature super hard, long life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors. Made in the USA, the Woodworker II ATB blade is the most popular for general table saw use. It has a plate thickness of .090, and the kerf is 1/8". If most of your cutting is stock 1-1/2" or thicker, Forrest recommends its 30-tooth blade (#85N53).


  • Premium carbide blades
  • Micro-grain carbide teeth
  • Maximum runout of .002"
  • Rip and crosscut smooth and tear-out free
  • Plate thickness of .090; kerf 1/8"
  • California Residents: Click here for Proposition 65 information.

    Articles:

  • What Circular Saw Blade Do You Need - One basic rule that should govern your blade selection is that the more teeth, the finer the cut.
     
     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.0

    (based on 4 reviews)

    75%

    of respondents would recommend this to a friend.

    Pros

    • Cuts fast (3)
    • Keeps its edge (2)

    Cons

    Best Uses

    • In the workshop (3)
    • Reviewer Profile:
    • Avid do-it-yourselfer (4)

    Displaying reviews 1 - 4

    Back to top

    |

     
    5.0

    Smooth Cuts (eventually)

    By  Rick

    from Boise, ID

    About Me Avid Do-It-Yourselfer

    Pros

    • Cuts Fast
    • Keeps Its Edge
    • Long Lasting
    • Smooth Cuts

    Cons

    Best Uses

    • In The Workshop

    Comments about Forrest Woodworker II Saw Blade 10" x 48 Tooth :

    I initially had problems with this blade cutting cleanly and I was disappointed as this blade isn't cheap. I also replaced my basic fence with an Incra model a few days later. I ended up checking and realigning all my saw adjustments at the same time. When I was done, this blade cut as well as any I've ever used. The rip finish is a good at the glue line blades.

     
    5.0

    the best of the blades

    By  richard

    from corsicana,tx.

    About Me Avid Do-It-Yourselfer

    Pros

    • Cuts Fast
    • Good Design
    • Keeps Its Edge

    Cons

    Best Uses

    • In The Workshop

    Comments about Forrest Woodworker II Saw Blade 10" x 48 Tooth :

    This Forrest blade is the way to go.The cuts are smooth and clean. If you also want splinter free cuts the 48 tooth woodworker II is the blade that will give that.

     
    1.0

    Not as good as I expected!

    By  woodworker171

    from Orlando, FL

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    • Left a lot of scaring

    Best Uses

    Comments about Forrest Woodworker II Saw Blade 10" x 48 Tooth :

    I was supprised to see how much scarring was left when ripping with this blade.

     
    5.0

    great saw blade

    By  Jim

    from Arkansas

    About Me Avid Do-It-Yourselfer

    Pros

    • Cuts Fast
    • Sharp

    Cons

    Best Uses

    • In The Workshop

    Comments about Forrest Woodworker II Saw Blade 10" x 48 Tooth :

    cuts a lot better than my old saw blade :-)

    Displaying reviews 1 - 4

    Back to top

    |