Close
Sign Up Today and Get a Special 10% Off Coupon

WoodRiver Guide Rail 4' x 8' Kit

Item #150006
$79.99
Qty.   or Add to Wish List

 
4.0

(10 reviews)

Read Reviews | Write a Review


Product Information:

Contains (2) 56″ Guide Rails, (1) Guide Rail Connector and (1) pair of Guide Rail Clamps to create the perfect guide rail system for ripping and cross-cutting 4′ x 8′ sheet goods.

This system will allow you to place a tool guide for ripping, crosscutting or routing at an acute angle on any size panel. 56" Guide rail component features same heavy-duty aluminum extrusion used in the WoodRiver clamp guides. Guide rail component has 2-1/8" x 1/2" profile with integral 1/4" T-tracks. Guide rail connector locks together multiple guide rails to form a continuous guide for your circular saw or router across any length material. Guide rail clamps secure the guide rail at each end. Clamps swivel about the “T” shaped anchor at any angle. Clamps can be placed at any position along the underside of the guide rail extrusion. Unique angle jig acts as a miter gauge for the guide rail system. The angle jig references any angle from the edge between plus or minus 60 degrees. The angle jig has positive stops at 90 degrees, plus or minus 30 degrees, plus or minus 45 degrees and plus or minus 60 degrees.


  • 56" guide rail component features heavy-duty aluminum extrusion
  • Guide rail component has 2-1/8" x 1/2" profile with integral 1/4" T-tracks
  • Guide rail connector locks together multiple guide rails to form a continuous guide
  • Clamps swivel about the “T” shaped anchor at any angle
  • Guide rail clamps secure the guide rail at each end
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.2

    (based on 10 reviews)

    90%

    of respondents would recommend this to a friend.

    Pros

    • Durable (8)
    • Attractive (4)
    • Good instructions / manual (2)

    Cons

    Best Uses

    • Reviewer Profile:
    • Avid do-it-yourselfer (7)

    Displaying reviews 1 - 10

    Back to top

    | Next »

     
    5.0

    Great gift for son-in-law

    By  Big Tom

    from Westerville, Ohio

    About Me Avid Do-It-Yourselfer

    Pros

    • Attractive Design
    • Durable
    • Great instructions

    Cons

    Best Uses

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    Son-in-law loves it. It was far better than the one he requested for his birthday

     
    5.0

    Very satisfied

    By  Ralph Breitenstein

    from Oregon

    About Me Casual Do-It-Yourselfer

    Pros

    • Durable

    Cons

    Best Uses

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    Good product good service I woud order from them if I need anything else.

     
    4.0

    Heavy duty guide

    By  Al

    from Arkansas

    About Me Avid Do-It-Yourselfer

    Pros

    • Durable
    • Strong center joint

    Cons

    • Plastic ends come off

    Best Uses

    • Cut sheet goods
    • Straight line rough wood

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    Strong well built straight edge system with integrated clamps. I have used a cheaper straight edge that you get from the "big box" store for years. This guide is much better. The integrated clamps really save time, and stay out of the way of your cutting tool. You have to place the guide offset from your cutline. I use combination square, or custom made "story stick" to quickly set the offset. No problem. The only problem (one star off for this) is the plastic ends pop out VERY easily. The first time I picked up the tool, the clamps slid down, popped out the plastic, and went right on the floor. GRAB THE CLAMP FIRST solves the problem, but it would be nice if the ends would hold them in.

     
    4.0

    "Too much whiz and not enough bang"

    By  Mauricio

    from Antigua Guatemala, CA

    About Me Professional

    Pros

    • Attractive Design
    • Durable

    Cons

    Best Uses

    • Living Room
    • Outdoors

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    I think it should improve the graphic description of the product, in this case the kit as one tends to think that the offer includes all the items that appear on the right side of your website. For the rest the tool is very good and covers all my expectations. Best Regards Mauricio

     
    5.0

    Time saver at it's best!

    By  Ron

    from Rotan,Tx

    About Me Avid Do-It-Yourselfer

    Pros

    • Attractive Design
    • Durable
    • Great instructions

    Cons

    Best Uses

    • Any and all

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    ANY and all

     
    3.0

    A little too flexible on long cuts

    By  Jeff

    from Southern Maryland

    About Me Avid Do-It-Yourselfer

    Pros

    • Convenient
    • Nice clamp system

    Cons

    • Not rigid enough

    Best Uses

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    I watched the video which stated that it was very rigid and bought it at the local Woodcraft. Guess what? It isn't that rigid. My first 8 foot cut with a jigsaw was pretty curvy. Should track better with the circular saw. It flexes too much. Other than that it works well. The clamping system is tight and out of the way.

     
    4.0

    I would buy this product again

    By  tnatua

    from Tahiti, French Polynesia

    About Me Avid Do-It-Yourselfer

    Pros

    • Attractive Design
    • Durable

    Cons

    Best Uses

    • Workshop

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    It's a pleasure to cut plywood

     
    4.0

    It does what it says

    By  Joe

    from Birmingham, AL

    About Me Avid Do-It-Yourselfer

    Pros

    • Durable

    Cons

    Best Uses

    • Plywood

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    It is pretty straight forward. I primarily use it to rip plywood since I don't own a table saw and it improved my line cutting tremendously.

     
    4.0

    Works pretty well

    By  Doctor Art

    from Mesa, AZ

    About Me

    Pros

    Cons

    Best Uses

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    The rail connector mechanism could align the rails more securely. There was a small tendency for it to come loose. I'd like to see a more positive locking mechanism (using a cam perhaps). Of course, since there are no instructions, it is possible that I was doing something wrong. In the end, I cross braced the join between the rails to prevent absolutely any side movement, which worked well.

     
    4.0

    very good

    By  Al

    from Trumbull, CT

    About Me Avid Do-It-Yourselfer

    Pros

    • Durable

    Cons

    • Heavy

    Best Uses

    Comments about WoodRiver Guide Rail 4' x 8' Kit :

    I buy many small items that are needed for my customers. [...] I have a small custom and furniture repair shop which prohibitives me from paying to much as I must pass it on to the customer.

    Displaying reviews 1 - 10

    Back to top

    | Next »