Close
Sign Up Today and Get a Special 10% Off Coupon

Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI x #2 Morse Taper

Item #149370
$34.99
Qty.   or Add to Wish List

 
4.5

(3 reviews)

Read Reviews | Write a Review


Product Information:

This chuck reversing adapter features a #2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck. Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock. By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly center your bowl on the vacuum head to finish turning perfectly centered.


  • #2 Morse taper
  • 1-1/4" x 8 TPI
  • Designed for use with Hold Fast vacuum chucking system
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.7

    (based on 3 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    • Compact (2)
    • Lightweight (2)
    • Reliable (2)

    Cons

    Best Uses

    • In the workshop (2)
    • Reviewer Profile:
    • Avid do-it-yourselfer (2)

    Displaying reviews 1 - 3

    Back to top

    |

     
    4.0

    VERY HANDY FOR VACUUM CHUCKING

    By  Paul B

    from Central Mass.

    About Me Avid Do-It-Yourselfer

    Pros

    • Compact
    • Lightweight
    • Reliable

    Cons

    Best Uses

    • In The Workshop

    Comments about Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI x #2 Morse Taper :

    Will use almost exclusively for transfer from 4 jaw chuck to vacuum chucks for bowl turning

     
    5.0

    Reversing Adapter

    By  John

    from Aiea, HI

    About Me Avid Do-It-Yourselfer

    Pros

    • Compact
    • Lightweight
    • Reliable
    • Strong

    Cons

    Best Uses

    • In The Workshop

    Comments about Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI x #2 Morse Taper :

    I have only had it a short time and used it several times already. It is great to center bowls and platers etc. on a vacuum chuck for removal and finish of base. Great tool and a time saver for any turner that uses a jam chuck or vacuum chuck.

     
    5.0

    A must have tool

    By  Dick

    from Redmond, WA

    About Me

    Pros

    • Durable

    Cons

    Best Uses

    Comments about Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI x #2 Morse Taper :

    This tool is important when you flip a piece around for your vacuum chuck to finish the bottom. You simply leave it on the chuck, put it in the tail stock and gently push it up until the vacuum chuck takes over. Then the piece runs true when you finish the bottom.

    Displaying reviews 1 - 3

    Back to top

    |