Save 10% on Laguna Tools
Your favorite Laguna Tools are on sale right now!
NOVA Precision Midi Chuck
Ideal for mini, midi lathes, or for smaller turnings on large lathes.
Save $45 Today!
Save 50% on WoodRiver® Bit Set
The 100-Piece Brad and Twist Bit Set makes a great addition to any shop.
Buy Now $24.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Worth it with a bed extension for bowls
nr. Ithaca, NY
Nova Bed Extension Swing-Away
I got tired of lifting the tailstock on my Nova lathe during bowl turning.
This plus the bed extension is expensive but certainly will save your back.
You can easily slide the tailstock out of the way after roughing the outside of a bowl.
Then easily slide the banjo out of the way during sanding and finishing of a bowl.
I did have to hone/lap the pieces to get the rails to the same height/width and remove burrs so the tailstock especially, and the banjo, would slide freely through the hinge onto the extension.
Yes, I would recommend this to a friend
This swing away attachment, or knuckle, is a great feature for the nova lathe user. It helps to move the extra bed section away when not needed or adds much length to the nova lathe with the extension. It is solidly built, and precise, and is easy to align with some tailstock movements. It is full of cosmoline grease when purchased, so get the gloves, rags, and paint thinnner and take the whole thing apart, degrease it, and put it back together with heavy-duty grease on the friction surfaces and the large pin. A truly great accessory for the nova lathe user. Very accurate too!
Nova Lathe Accessories
West Des Moines, Iowa
It would be great if you would provide more information on accessories, such as pictures of each in use, what else might be required to use these (such as with the Nova chuck jaws - which chuck, etc.).
1 - 3
Back to top
©2015 by Woodcraft Supply LLC