Close
Sign Up Today and Get a Special 10% Off Coupon

Titebond Cold Press Veneer Glue, Quart

Item #145718
$10.99
Qty.   or Add to Wish List

 
4.5

(5 reviews)

Read Reviews | Write a Review


Product Information:

Titebond Cold Press glue is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. It offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and non-backed wood veneers. Set time is usually 15 minutes at room temperature, allow 24 hours full cure.

  • Economical alternative to contact cement
  • Formulated to minimize "bleed-through"
  • Moderate speed of set
  • No harmful vapors
  • Safe - nonflammable
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.6

    (based on 5 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    • Easy application (4)
    • Very adhesive (3)

    Cons

    Best Uses

    • Permanent adhesion (3)
    • Reviewer Profile:
    • Quality oriented (4)
    • Primary Use:
    • Personal (4)

    Displaying reviews 1 - 5

    Back to top

    |

     
    3.0

    Not what I needed

    By  CB

    from CO

    About Me Value Oriented

    Pros

    • Affordable

    Cons

    • Limited Effectiveness
    • Not for all surfaces

    Best Uses

    • Raw Wood Backed Veneer

    Comments about Titebond Cold Press Veneer Glue, Quart :

    I thought I was in luck when I came across this product, as it appeared to be a significantly less expensive alternative to Better Bonds Titan DX. I am sure this glue would be fantastic for raw wood or two ply veneers, however I almost entirely use paper backed veneer....this just doesn't cut it when compared to Titan DX. Oh well...

    • Primary Use:
    • Personal
     
    5.0

    Finally a glue I can trust for veneering

    By  Jack

    from Ottawa, Ontario, Canada

    About Me Quality Oriented

    Pros

    • Dries Quickly
    • Easy Application
    • Very Adhesive

    Cons

    Best Uses

    • Permanent Adhesion

    Comments about Titebond Cold Press Veneer Glue, Quart :

    Was able to glue down marquetry veneer without fear of rippling due to expansion. However glue not readily available in Canada - had to order from USA.

    • Primary Use:
    • Personal
     
    5.0

    Easiest glue to use for veneering

    By  tomb

    from Northwest Ohio

    About Me Quality Oriented

    Pros

    • Easy Application
    • Very Adhesive

    Cons

    Best Uses

    • Permanent Adhesion

    Comments about Titebond Cold Press Veneer Glue, Quart :

    Simply the easiest glue I have found for veneering! No mixing, easily spreadable, good open time, dries hard for no movement. Plus if you are using a vaccum press the glue does not need air to cure.

    • Primary Use:
    • Business
     
    5.0

    Perfect for veneer work

    By  Bob

    from Lititz, PA

    About Me Quality Oriented

    Pros

    • Easy Application
    • Long working time

    Cons

    • Not reversible

    Best Uses

    • Apply new veneer
    • Repair old veneer

    Comments about Titebond Cold Press Veneer Glue, Quart :

    I used this veneer glue on a large surface (7'x 1') and had sufficient time to spread the glue, apply the veneer, cover with layers of wood, and add clamps. When dry, the veneer was firmly attached with no bubbles. Note that this is a yellow glue and is not reversible like a hide glue.

    • Primary Use:
    • Personal
     
    5.0

    works great with vacuum press

    By  ACADAmos

    from Seattle, WA

    About Me Quality Oriented

    Pros

    • Easy Application
    • Very Adhesive

    Cons

    Best Uses

    • All Surfaces
    • Permanent Adhesion

    Comments about Titebond Cold Press Veneer Glue, Quart :

    I've been searching for a glue with a long open time for quite some time. I've used Titebond's hyde glue but often its to thick. This is a thin watery glue thats super strong and almost invisible! I can glue large door panels and 10 minutes later readjustments are easy. No bleed thru on thin or porus veneers in my vacuum press either. Great product!

    • Primary Use:
    • Personal

    Displaying reviews 1 - 5

    Back to top

    |