Close
Sign Up Today and Get a Special 10% Off Coupon

System Three ClearCoat, 12 oz. Kit

Item #144501
$33.99
Qty.   or Add to Wish List

 
5.0

(1 reviews)

Read Reviews | Write a Review


Product Information:

Designed by System Three as moisture barrier coatings, Clear Coat Kits are easy to apply, with no hazardous solvents. These coatings are especially useful in construction where constant immersion is likely, as in boats. The mixed epoxy is applied with a roller, or a brush, without thinning. Each coat is allowed to cure before recoating, and recoating can be done without sanding, if done within three days. For continued exposure to sunlight, a spar varnish coating over the moisture barrier coating is recommended for UV protection. 12 oz. kit will cover approximately 50 sq. ft. with a 3 mil. coverage

  • Moisture barrier coatings
  • Especially useful in construction where constant immersion is likely, as in boats.
  • 12 oz. kit will cover approximately 50 sq. ft. with a 3 mil. coverage
  • California Residents: Click here for Proposition 65 information.

    Articles:

  • Characteristics of Finishing Materials - Learn about the different characteristics of finishing materials
     
     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    5.0

    (based on 1 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 1

    Back to top

    |

     
    5.0

    This is good stuff.

    By  hayseed

    from Sutherlin, OR

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Clean

    Cons

    Best Uses

    • Detailed Work

    Comments about System Three ClearCoat, 12 oz. Kit :

    I used this for filling powder plug beetle holes in curly maple. After the sanding, scraping and finish was done, the finished table tops were absolutely beautiful. It dries quite slowly 24hr+ before it can be sanded.

    Displaying reviews 1 - 1

    Back to top

    |