Close
Sign Up Today and Get a Special 10% Off Coupon

WoodRiver Straight Router Bit 1/2"SH 31/64"D 1"CL

Item #144141 WoodRiver
$13.99
Qty.   or Add to Wish List

 
4.0

(2 reviews)

Read Reviews | Write a Review


Product Information:

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 600 grit wet grind on the K-20 German carbide produces a clean, extremely sharp, and durable cutting edge. Bit bodies are coated to help prevent resin build up and make resin removal easier. High quality Japanese bearings are used on bits fitted with guide bearings. Bit is carbide tipped. This bit is sized to fit today's slightly reduced plywood thicknesses. Essential for anyone who builds plywood case pieces. Two flutes.

  • These bits are sized to fit today's slightly reduced plywood thicknesses
  • Essential for anyone who builds plywood case pieces
  • Two flutes
  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.0

    (based on 2 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 2

    Back to top

    |

     
    4.0

    check your supplier of plywood

    By  Bill

    from Houston, TX

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use

    Cons

    • None

    Best Uses

    • In The Workshop

    Comments about WoodRiver Straight Router Bit 1/2"SH 31/64"D 1"CL :

    After using the bit, found out that my supplier of plywood was not 31/64, but near 7/16", a full 1/16" shy of the nominal size. Makes for a loose joint. The bit worked fine, not the bit's fault. Will carry a sample of the groove to the store to check the thickness! I think a 7/16 bit will take care of this problem so that I don't have to use the dado blade.

     
    4.0

    Better than I expected

    By  D.W.

    from Leavenworth, KS

    About Me

    Pros

    Cons

    Best Uses

    Comments about WoodRiver Straight Router Bit 1/2"SH 31/64"D 1"CL :

    This was my first attempt at using a "plywood" sized bit for dados. Previously, I had always used an undersized bit and made several passes. As is usually the case, using the right tool (in this case the right sized bit) really does make all the difference and I can't believe how tight the dados are! I picked this brand because it was the cheapest and I didn't have a lot of dados to make. That said, it has remained sharp much longer than I expected. Just beware that it fits VERY tightly in the case it comes in. Use caution when removing it, or you can easily slip and give youself a nasty cut.

    Displaying reviews 1 - 2

    Back to top

    |