Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 5
Back to top
Does what is is built to do.
WoodRiver Straight Line Toggle Clamp, 6-3/4" x 3-1/4", 300 lb. Capacity
I used this straight line toggle clamp to build a pen press on a 2 1/2" X 12" oak board. It works perfectly and cost less than $10. a 6"X 1/4" X20 allthread and a T nut completed the adjustable stop end. I use several smaller clamps of this type as hold downs for other projects. Small, strong, affordable.
Yes, I would recommend this to a friend
Solid, reliable jig building
Green Bay, WI
Solid, reliable fixturing and jig building. Don't rely too heavily on the "rated load" for toggle clamps. Those loads are developed in a lab under ideal conditions, and probably without a lot of cycling. I recommend using for loads up to ~1/2 the rated load. Excellent for repetitive clamping and fixtures.
It´s a very useful clamping device
Just what I needed
Easy mounting. Wide range of adjustability. Simple yet effective.
Not strong enough
Though rated at 300 pounds I don't think it can withstand that load. Used 4 as lifts for a workbench (272 pounds total weight), but the angled steel support bent on the first use. Had to change them all with 4 800 pounds from another source
No, I would not recommend this to a friend
1 - 5
Back to top
©2015 by Woodcraft Supply LLC