Close
Sign Up Today and Get a Special 10% Off Coupon

Mirror Coat System Three Top Coat, 1-1/2 Pint

Item #143153
$41.99
Qty.   or Add to Wish List

 
5.0

(5 reviews)

Read Reviews | Write a Review


Product Information:

MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some plastics. MirrorCoat cures to a glossy, smooth finish that is scratch and stain resistant. Cured MirrorCoat is waterproof and unaffected by alcohol. Use a maximum of 1 fluid ounce per quart of resin. MirrorCoat hardeners ship as hazardous and will incur additional charges when shipped via air. Ground shipments generally do not have additional hazard charges.


  • 1-1/2 Pint kit covers approximately 4.8 sq. ft
  • You can actually create “floating” objects in your finish by embedding them between coats
  • Perfect for bar and table tops, decoupage, small clocks and crafts
  • Super hard finish
  • Has more depth than any other topcoat
  • California Residents: Click here for Proposition 65 information.

    Articles:

  • Hot New Tools and Accessories Issue 23 - Take a look at the roundup of new products the Woodcraft Development Team is recommending to help you have a super successful woodworking experience.
  • Hot New Tools & Accessories Issue 23 - Take a look at the roundup of new products the Woodcraft Development Team is recommending to help you have a super successful woodworking experience.
     
     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.8

    (based on 5 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    Cons

    Best Uses

    • Small areas (5)
    • Reviewer Profile:
    • Avid do-it-yourselfer (3)

    Displaying reviews 1 - 5

    Back to top

    |

     
    5.0

    First Timer with this finish

    By  Electricman56

    from Reading, PA

    About Me Avid Do-It-Yourselfer

    Pros

    Cons

    Best Uses

    • Small Areas

    Comments about Mirror Coat System Three Top Coat, 1-1/2 Pint :

    This finish is great! The only thing I'd add is FOLLOW THE INSTRUCTIONS! I assumed the plaque I was coating with this finish was level because I assumed my work bench upon which the project was sitting was lever, I didn't check it with a level and the finish was slightly higher on one side after it cured. Also, I was skeptical about using a torch to lightly heat the finish to remove any air bubbles as the instructions stated, but it worked brilliantly!

     
    5.0

    get rid of bubbles

    By  mrclean

    from Phila, Pa

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy to use

    Cons

    • None

    Best Uses

    • Live edge tables
    • Small Areas

    Comments about Mirror Coat System Three Top Coat, 1-1/2 Pint :

    to get rid of bubbles, after each coat go over area with burnsamatic torch. hit it real fast back and forth and that will pop all bubbles

     
    5.0

    excellent product,

    By  Musiclogig

    from Portage Michigan

    About Me Professional

    Pros

    • Mix pour remove bubbles

    Cons

    • None

    Best Uses

    • Detailed Work
    • Fretless bass fretboards
    • Small Areas

    Comments about Mirror Coat System Three Top Coat, 1-1/2 Pint :

    This application was a fretboard coating for a fretless bass guitar, hard clear glossy surface. Product works as advertised

     
    5.0

    I would buy this product again

    By  MX PLUGS

    from Stem NC

    About Me Casual Do-It-Yourselfer

    Pros

    • Lightweight

    Cons

    Best Uses

    • Small Areas

    Comments about Mirror Coat System Three Top Coat, 1-1/2 Pint :

    Dose the job

     
    4.0

    Shines Like New Money

    By  Dave the perfectionist

    from Crestview, Fl

    About Me Avid Do-It-Yourselfer

    Pros

    • Dries quickly
    • Easy to apply
    • Even Paint Distribution

    Cons

    • Bubbles on Oak
    • Requires 3 or 4 coats

    Best Uses

    • Large Areas
    • Small Areas
    • Table Top

    Comments about Mirror Coat System Three Top Coat, 1-1/2 Pint :

    Easy to understand instructions but failed to mention if sealer or what type was required on bare wood. I think a sealer may have prevented the excessive bubbles I experienced.

    Displaying reviews 1 - 5

    Back to top

    |