See everything on sale inside our February Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog anytime!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Needed work before it was usable
BG the Tool guy
Nova 4" Tool Rest
The tool rest is covered with crinkly paint so my hand would not slide along the surface. Ok, I thought, just sand off the paint and it will be great. Unfortunately, the paint filled a fifty cent piece size hole in the casting. I had to grind down the face of the rest about 1/4" to eliminate the hole. Now the face is smooth and the tool rest does work great. It just took about an hour and a wornout 50 grit 4x24 sanding belt to get there. If I threw away the item as soon as it arrived and went to work instead, I would have earned enough to buy the worlds best tool rest. Unfortunately, who can tell the depth of a casting void until the bottom is reached. Will yours have this problem? No way to know what is under the paint/bondo.
No, I would not recommend this to a friend
Does not look like the picture, but it is the correct size and works well.
Yes, I would recommend this to a friend
This should come with the lathe
Fred Up Front
Oak Bluffs, MA
You need this size tool rest for turning small pieces between centers otherwise you can't get the tool rest close enough to the piece. This should come with the lathe. Also a locking swivel collar makes you a much happier turner. That way the tool rest stays at the height you had it when you unlock it to pivot. It is really annoying to have to hold and pivot when you really only want to pivot. If I worked for Teknatool, I would make the small tool rest and swivel collar standard and make the faceplate an option.
1 - 3
Back to top
©2016 by Woodcraft Supply LLC