See everything on sale inside our February Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog anytime!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 9
Back to top
Great Idea Too! (Iffy Execution.)
4" Quick Disconnect Hose to 4" O.D. Dust Collection Fitting
I bought this item to complement the 12" x 12" contractor saw dust extraction fitting (item #805O09), as both have the same tapered fitting dimensions. However, as I said about affixing the dust chute to this fitting: "The tapered "Port", when combined with the matching tapered quick disconnect 4" O.D. Dust Collection Fitting (item #140259) will work - if you use either a rubber band for a friction fit (if you regularly need to move it to more than one machine), or, with a suitable adhesive (such as E-6000) if you're never going to move it again. So, yes, I would recommend this to a fellow woodworker with the appropriate forgoing modifications. In fact, I may try affixing the rubber band to the inside of the 4" quick disconnect - if that doesn't interfere with connecting it to the straight, un-tapered, 4" hose to 2¼" fitting connector I also need to use."
Yes, I would recommend this to a friend
Didn't work for me
Bought to use on a Dewalt DW734 planer. Only fit onto exhaust port about 1/2 inch. Fell off and broke.
WRONG THREAD FOR HEAVY DUTY HOSE!!!!!
WRONG THREAD. I bought it at the store with help and it will not screw on the hose.
No, I would not recommend this to a friend
I will buy more
it was a little hard to atach to the hose, but with a little dish soap it went on. my only problem is that it dosent stay on the port. I have to use bailing wire to keep it connected to my power tools. I may try sanding at least one to see if it will go in the port a little farther and hold on its own.
Vancouver BC Canada
I was looking for something to solve the problem of connecting 4" flex hose to 4" gates for dust collection and to the 4" collector on the stand I purchased from Woodcraft.
Useless for my hose
Uh, the threads are left-hand and backwards for my heavy duty hose which is right-hand wound, so it will not screw on. Suggest putting this in the product description
It works, but.........
Morgan Hill, CA
The end that goes over a 4" hard pipe is tapered, and only slides onto the pipe about 1/2". And because it's tapered, it's not a good fit, and wants to come loose. I had to tape it to the pipe to get it to stay.
Would buy again.
Works with my dust collection system and saved time when changing tools.
Quick Connect and Disconnect
Connects great to the plastic hose, easy to use and durable.
1 - 9
Back to top
©2016 by Woodcraft Supply LLC