Waterlox Quart Finishes Save 10%
Stock up now for your projects!
RIKON Mini Lathe Now $329.99
This great lathe is big on features, small on size.
Buy Now & Save $70
Save $35 on HTC3000
Make the most of your space by putting your tools on wheels.
Now Only $69.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 9
Back to top
learn to use this tool
Mt. Pleasant, Utah
Woodthreading Kit, 1-1/2" x 6 TPI
When first tried the threads of the rod were shorter than the tapped hole. The thread box must be pushed down while in use to lengthen the thread spacing so you get the same number of threads per inch in rod and hole. Otherwise the threads bind. The thread box also needed the blade honed so it didn't tear. After adjusting it worked well and I'm happy with results
Yes, I would recommend this to a friend
Needed a little tweaking but Awesome!
Santa Monica, CA
The one star off is due to the tweaking I had to do before it would work right. After tweaking it's definitely five stars!
The dowel I received was a tiny bit oversized so it kept binding up in the entry hole. I used a scraper and trimmed down the dowel a little so it fed in easier. It still kept binding up on the way out. It took me a little fiddling to figure out that it was because the cutter wasn't protruding enough. Once I set the cutter correctly and rubbed on a nice helping of boiled linseed oil it worked like a dream! I wish they made bigger ones too.
Works as advertised
It does what it says! Just make sure you lubricate the tap and die with linseed oil during use. It makes a big difference!
From the manual: "The hole in the removable wooden bottom is drilled to exact specifications by the factory." The opening in mine is not centered causing wider threads on one side. I used calipers to measure this. It cannot be corrected.
No, I would not recommend this to a friend
Use proper dowel size.results are a sure thing!!
When it works, it works great. The tommy bar on the tap is much too soft as a handle without wrapping it around the shaft. The cutter on the thread cutter is very low quality steel. I mangled mine on a hard spot (not a knot). I plan on making my own cutter as a replacement. With modification, this can be an outstanding tool.
Difficult to use
This was a disapointing product. The tap handle bent and it was very difficult to cut through maple even if well lubricated. The die was just as hard but was solidly made. Perhaps the 1 1/2 inch size is just to much to ask of this design.
great for vice screws
La Fayette, Ga
The woodthreading kit includes both the tap and die. There are many uses for a threaded wood screw. especially since you can use many different types of wood and can use it for a vice or for assembly of other wooden projects.
just what I needed
Product to be used for adding screw thread to hand made porcelain objects.
1 - 9
Back to top
©2015 by Woodcraft Supply LLC