Close
Sign Up Today and Get a Special 10% Off Coupon

Adjustable Handle with 5/16" - 18 Stud

Item #129132
$5.29
Qty.   or Add to Wish List

 
3.5

(3 reviews)

Read Reviews | Write a Review


Product Information:

Ratchet Multi-Position Handle. Move the handle to any position so it doesn't interfere with your work, or use it for those "tight" places where full turns are not possible. 2-1/2" nylon handle, height 1-7/16", Steel stud 1" long x 5/16"-18tpi.

  • 2-1/2" nylon handle
  • Height 1-7/16"
  • California Residents: Click here for Proposition 65 information.

    Articles:

  • Laptop Work is Laid Back With This Wheeled Desk - Raise your comfort level with this adjustable-height worktable that you can use just about anywhere.
     
     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    3.7

    (based on 3 reviews)

    33%

    of respondents would recommend this to a friend.

    Pros

    • Attractive (2)
    • Durable (2)

    Cons

    Best Uses

    • Reviewer Profile:
    • Avid do-it-yourselfer (3)

    Displaying reviews 1 - 3

    Back to top

    |

     
    3.0

    Disapointment

    By  Virgil

    from Montgomery, Texas 77356

    About Me Avid Do-It-Yourselfer

    Pros

    • Attractive Design
    • Durable

    Cons

    Best Uses

    Comments about Adjustable Handle with 5/16" - 18 Stud :

    I purchased this item to use on my lathe banjo. to hold the tool rest securely. I carefully measured the opening before ordering this item to make sure that I didn't order a incorrect handle. It is advertised as being 5/16" with 18 TPI which is exactly what I needed. What I received was a handle that was slightly less than 5/16". It appeared to be catching around 80% to 90% of the thread and it sort-of worked if you were willing to accept a slight rocking from side to side as you tightened it up. I ended up taking a 5/16" handle off of my stationary belt sander and using it on the lathe instead of the one that I bought because the lathe handle gets lots of use and I was afraid it might strip out eventually. I used this handle on the belt sander because once it was tight it wouldn't be used all that often. I am planning on spending slightly more for another handle and this time I am going to buy one from the manufacturer that made the belt sander and lathe. I actually think the handle from WoodCraft is metric instead of SAE.

     
    5.0

    Good Replacement

    By  Wayne

    from Boston, MA

    About Me Avid Do-It-Yourselfer

    Pros

    • Durable

    Cons

    Best Uses

    • Replacement

    Comments about Adjustable Handle with 5/16" - 18 Stud :

    Simple device that does what it was designed to do.

     
    3.0

    Could be better

    By  Don

    from Tampa, Fl.

    About Me Avid Do-It-Yourselfer

    Pros

    • Attractive Design
    • Basic design is good

    Cons

    • Flimsy
    • Not durable enough

    Best Uses

    • Workshop

    Comments about Adjustable Handle with 5/16" - 18 Stud :

    The basic design is very good, but it should be make from aluminum or some lightweight metal rather than plastic. It feels flimsy and it doesn't feel like it will last very long.

    Displaying reviews 1 - 3

    Back to top

    |