See everything on sale inside our August Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Original Wood Finish by Tried & True
Tried & True Original Wood Finish, Pint
I used this product on a vintage military rifle stock. It gave me the results I was looking for: a good protective finish without an unnatural, glossy look. Also, a little goes a long way.
Yes, I would recommend this to a friend
Great for Restoration
Rob the Architect
I was initially apprehensive about this product because many of the reviews around the internet claimed it "doesn't dry," but I was looking for a traditional finish that would complement an early 19th century piece that had a hard varnish over the original oil. The trick with this finish, I think, is that it takes a lot of elbow grease. Follow the instructions carefully - don't apply very much, wipe off the excess after an hour or so, burnish it 24 hours later. The second step is very important - I let it sit too long, and it was twice as hard to rub off as the first two coats were. Really take your time on the polishing, but I think what works best is to generate a little heat to soften the wax. I don't think this finish is any more work than Formby's Tung Oil, but it's so much more beautiful: soft to the touch, it looks and smells natural, the kind of finish that makes people want to reach out and pet your furniture. Way less hard though - I'd hesitate before recommending it for a dining table.
Very nice stuff
Lattices in Wood
Since I don't see a review, I'll leave a comment. I found this to be a very nice product. I usually finish with linseed oil, including their product. I usually wax the finished piece after the oil sets.
I tried this on a lark, and it gives a very nice result- either as the only finish, or as the last coat in a normal oil finish.
The instructions, the website, the sticker on the top of the can all say VERY THIN COATS! OK, says I. It has a peculiar consistency since the wax is not completely dissolved in the oil. (shop temperature 70 F) I applied a barely wet coat with a stiff stippling brush, very much like paste wax- wiping after about an hour (big piece). It gives good coverage with very little waste.
The finish sets to a waxy finish which buffs up to a smooth final result with very little work.
I am very happy with it after two sizable pieces.
I used this product on a project made of West African Rosewood, (bubinga) and it looked fantastic. I followed the simple directions on the label and applied 2 coats. Very easy to use and the results were great.
1 - 4
Back to top
©2016 by Woodcraft Supply LLC