Sign Up Today and Get a Special 10% Off Coupon

NOVA Lathe Accessories

Nova Bed Extension Swing-Away
$204.99
20" Nova Bed Segment
$219.99
Teknatool Cast Iron Leg Set
$434.99
Nova Outboard Tool Rest Assembly
$294.99
Nova 1" Shank Heavy Duty Bowl Rest
$55.99
Nova 4" Tool Rest
$27.99
Nova Handwheel
$34.50
Replacement Belt for Nova 3000 & Nova 1624-44
$19.75
NOVA TR300/1 12" Tool Rest Lathe Accessory
$38.99
NOVA TR300/1 12" Tool Rest Lathe Accessory
$38.99
NOVA 5016 Tailstock Adaptor Chuck Accessory
$37.99
NOVA 5016 Tailstock Adaptor Chuck Accessory
$37.99
NOVA 2MTLC Simple Live Center 2MT Lathe Accessory
$25.99
NOVA 2MTLC Simple Live Center 2MT Lathe Accessory
$25.99
NOVA 2MTSPUR Simple Spur Center 2MT Lathe Accessory
$22.99
NOVA 2MTSPUR Simple Spur Center 2MT Lathe Accessory
$22.99
NOVA 25048 Hybrid Stand Lathe Accessory
$304.99
NOVA 25048 Hybrid Stand Lathe Accessory
$304.99
NOVA SFP80L 3" Faceplate 1 1/4" Thread Accessory
$17.99
NOVA SFP80L 3" Faceplate 1 1/4" Thread Accessory
$17.99
NOVA 6021 Soft Chuck Accessory Jaw Set
$21.99
The following accessories are available for Teknatool Nova 3000, DVR 3000 and DVR XP Lathes.

Bed Extension Segment. Precisely machined cast iron bed extensions allow you to increase bed length by 20" per segment and use alignment pins to ensure overall bed accuracy as you add extensions. Includes fastenings and instruction manual. The NOVA Cast Iron Stand provides rock solid stability for all NOVA lathes. Made from high quality cast iron, with interchangeable leg sections, this stand is the perfect companion to both the Nova 1624 and the Nova XP DVR lathes. Compact for easier mobility and set up, but sturdy enough to cope with the big capacity the NOVA 1624 & DVR XP has - 29" bowls (with optional outrigger accessory) and 44" between centres (with optional accessory extension bed). Mounting holes in the feet of the stand allow it to be bolted to floor avoiding any "walking" when roughing or turning large out of balance work. This unit is easy to assemble and is easy to clean since there is no collection area under the lathe. Specifications: height of stand: 802mm/31.5", Weight: 22kg/110lbs, Floor space: 820mm x 1386mm/32" x 54.5".

Outboard Tool Rest Assembly. This heavy duty cast iron outboard rest unit is designed to provide rock steady chisel support for all larger turning work up to 29" in diameter. The arm system articulates out to give adequate clearance from the spindle for work with a thickness up to 8.5". The arm articulates through a wide arc, and the toolrest post can be locked along the length of the arm to allow for all shapes and sizes of woodturning including rim turning. The unit is easily bolted in place at the end of the headstock bed casting and requires no more room allowance than the normal lathe because the unit is designed to be used with the Nova 3000's and DVR's swivel headstock in front of the lathe.

Heavy Duty Bowl Rest. A new design bowl rest made out of 25mm solid steel, it's much more sturdy and vibration absorbing than the old design. As a bonus, it has a shape which gives better chisel support on the outside and inside of bowls. Because of the curve you are able to position your chisel support much closer to the bowl than before.

3" Tool Rest. Handy for smaller work when you don't want a toolrest to get in the way. 1" shank.

Nova Hand Wheel is used on the outboard end of the Nova 3000 lathe spindle. Simple to screw into place, the handwheel is used to assist the turner in positioning work or to slow it down manually.

NOVA Swing Away Tailstock

  • Saves Space Without Having To Remove Extra Bed Length
  • Easy To Swing Away
  • saves Time - No Need To Keep Mounting And Un-Mounting Extra Bed Extension And/Or Tailstock


NOVA TR300/1 12" Tool Rest: Suitable for all lathes with a 1” toolpost fitting, this NOVA 12" Tool Rest is made from solid cast iron for a longer life along with specially designed ribbing to maximize its rigidity.

NOVA 5016 Tailstock Adaptor: This tailstock adaptor fits all NOVA lathes and other lathes with a 2MT tailstock. It allows perfect allignment when remounting work to turn the other side in dead or live modes.

NOVA 2MTNA Acruline 2MT: The 2MTNA Acruline 2MT alignment accessory is a double ended 2MT with can be fitted into the lathe's tailstock and headstock spindles. Used to check and correct your lathe's alignment.

NOVA 2MTLC Simple Live Center, 2MT: This 2MT simple live center is used in the tailstock of your lathe for work holding. Constructed with heavy-duty bearings, this simple accessory has a long life.

NOVA 2MTSPUR Simple Spur Center: The 2MT NOVA Simple Spur is used in the headstock for work holding. With it's strong four-prong profile and medium tensile carbon steel, this unit can handle the stress of wood holding.

NOVA 25048 Hybrid Stand: The NOVA Hybrid Stand is a superb accessory for your DVR XP lathe. It is constructed of a mix of solid steel and cast iron to provide rigid stability in a comparitively light package. Fits all NOVA lathes except for the Midi and 2024 models.

NOVA SFP80L 3" Faceplate 1-1/4" Thread: The SFP80L 3" faceplace with 1-1/4"-8 TPI is suitable for all NOVA lathes and all lathes with a 1-1/4" headstock spindle thread. Comes standard with all NOVA lathes, but is a great replacement part or upgrade for your old lathe.

NOVA 6021 Soft Jaw Set: Consisting of four high-quality soft nylon segments, this accessory allows you to hold material without marring. Fits all NOVA chucks.