Sign Up Today and Get a Special 10% Off Coupon

Work Sharp 3000

Work Sharp 3000
Work Sharp 3000 Knife Sharpener
Work Sharp 3000 Wide Blade Attachment
Work Sharp 3000 Tool Bar Attachment
Work Sharp 3000 Knife Sharpening System Replacement Belt Kit
Work Sharp 3000 Leather Hone
Work Sharp 3000 Tempered Glass Plate
Work Sharp 3000 Slotted Wheel
Work Sharp 3000 Coarse Abrasive Kit
Work Sharp 3000 Fine Abrasive Kit
Work Sharp 3000 Honing Abrasives Kit
Work Sharp 3000 Abrasives Kit Slotted
Work Sharp 3000 Felt Polishing Wheel
Work Sharp 3000 Surface Conditioning Wheel
You can monitor stock removal from above with the Work Sharp's "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This will be the difference between sharpening and ruining a valued tool.
  • Air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives
  • Slotted "see-through" wheel for fast and precise sharpening of carving and lathe tools
  • Precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide
  • No jigs needed; just select angle and sharpen
  • Lapping abrasive in sharpening port increases burr removal and speeds sharpening
  • Rigid bevel angle settings and Skew Cam provide precise positioning of the Sharpening Port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup.
  • Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper
  • Allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel
  • Precise bevel angles are set in the Sharpening Port, not in a fixture or jig, so switching between angles is simple and fast
  • No re-calibration required for changing wheel diameter or tool size
  • Coarse grind for rapid shaping and then micro-fine hone in one port
The Work Sharp 3000 comes with a 2 year manufacturer's warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs. Abrasive Kit, Coarse includes P80 (2), P120 (2) P220 (3) P400 (2) Abrasive Kit, Fine includes P400 (4), P1000 (6), 2"x2" P400 (2) Abrasive Kit, Hone includes 3600 Micro-Mesh™ (1), 6000 Micro-Mesh™ (1) Abrasive Kit, Slotted includes P80 (1), P400 (2), P1200 (2), 6000 Micro-Mesh™ (1)