Sign Up Today and Get a Special 10% Off Coupon

Proxxon Micro Mill, Model FF230, and Accessories

Proxxon Micro Mill, Model FF 230
$1,299.99
Fine Feed for FF 230
$134.99
Step Clamp Set, Model 24256
$28.99
Step Clamp Set, Model 24257
$52.99

Proxxon Micro Mill, Model FF230, and Accessories

The MICRO mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as fine feed when milling. One revolution equals 1/32" (1mm) travel, 1 division equals .002" (0,05mm). The quill and headstock may be locked in position, which is essential when milling.  The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10-5/8" x 35/32" (270 x 80mm)and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm).

Technical Data

  • Speeds: 280, 550, 870, 1,250, 1,700, 2,500rpm
  • Table Size: 10-5/8" x 3-5/32" (270 x 80mm)
  • Column Size : 1 3/8" diameter  x 15 3/4" long (35 x 400mm)
  • X-Y Travel: 6-11/16" x 2 9/16" (170mm x 65mm)
  • Overall Height: 20" (500mm)
  • Volts:110 - 120V
  • AC: 60Hz
  • Weight: 41 lb. (17kg)

See 'Ships Direct from Manufacturer' link below for warranty and return details.