The unique design of these tools allow them to solve problems normally associated with parting-off or shaping end grain on the lathe. Blades are ground with a unique hollow ground edge that forms a pair of cutting spurs on each side of bevel edge.
- These spurs score cross grain fibers and shear end grain leaving a smooth surface.
- A taper is also ground back from the hollow ground edge to eliminate binding in the cut.
- Blades are 6-1/2" long and are offered in thicknesses of 3/16" or 1/16" (2mm) thick.
- The 1/16" model features an innovative secondary grind design near the parting tip for easier, quicker sharpening.
- Handle length 11-1/2".