Shop Now & Save $200 on RIKON Deluxe Bandsaw
This 14" deluxe beauty is perfect for any shop.
Buy Now for $799.99
Cool Retro Green Shop Stool $49.99
Take a load off with this chrome retro stool.
Shop & Save $20
Save $40 on RIKON Slow-Speed Grinder
Keep old tools sharp without edge destroying heat.
Now Only $99.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
Shipping / Billing Info:
of respondents would recommend this to a friend.
1 - 5
Back to top
Very poor even for the price
Jet 8" Jointer / Planer Combo, Model JJP-8BT
Positives:* Price* Compact size* Feels sturdyCons:* Warped Table* Horrible Assembly - There are only about 6 parts to attach out of the box, the small screws and no space for wrenches makes attaching parts a huge pain. * Tables not coplanar - no mechanism exists to adjust. You either get one perfectly machined or you send it back because you can't fix it* Dust collection - awful. It has a dust port but the port is poorly designed, only about 30% of material will get picked up by a dust collector. A mountain of shavings begin to accumulate inside the dust port, eventually reaching the roller and the cutting knifes at which time the shavings are ejected out of the top of the jointer directly into the user's face and hands. Very unpleasant.* Pulley belt snapped after 20 minutes of use, I have no idea why, but my guess is that wood shavings from the poor collection stalled cutting knifes causing the belt to snap* Chain that drives the rollers for the planer is located directly above the arbor of the cutting knife cylinder, there is no clearance for the chain. Within a few minutes of use the chain began to wear two grooves into the arbor of the cylinder that holds the blades* Blade adjustment - also a nightmare (took 4 hours to get even close to parallel). Poorly designed knife lock down: bad set screws which are slightly spring loaded and while tightening the blades against the cylinder using several set screws the blade shifts with each turn as the set screws get tighter, almost impossible to keep aligned with the table and second cutting knife...not that it matters since the table is also out of plane and can't be adjusted anywayIn short, I didn't expect the highest quality from a tool in this price range. There were no bells or whistles I just hoped it could flatten a surface and square an edge for planing and ripping. It fails in these two areas. Dust collection is also pathetic and makes the dust issue even more hazardous. DO NOT BUY! I got mine as a Christmas present. I live where there is snow, so I couldn't get it put together until about April. [...]
No, I would not recommend this to a friend
Makes great fire starter
Tried edge jointing 5/4 walnut for 35" table top, but I could not adjust the machine enough to cut straight. [...]Instructions had typos, mislabeling parts and referring to parts that didn't exist. Tables arrived neither parallel, nor coplanar. I had to call customer service to get instructions to level the tables, which helped but didn't solve the problem. Fence is not square to the table, cupped, and has a lot of play.Blades were a bear to adjust to the out feed table. They're thin.Didn't test the planer. I returned this after several hours of trying to adjust it.
Good for small projects
After using this product for about 6 months on various projects from doors to side tables I have found that it does a good job as a jointer but only on pieces of wood under about 2.5 ft in length. The outfeed table is just too short to handle anything longer than that. I actually don't use it for the planer funtion so I can't comment on that. I have not had to replace/sharpen the blades yet and have ran walnut, maple and cedar through it with good results. The table adjustment (in and out feed)could be better, but I haven't had any real troubles with it. It has saved me a lot of time and I plan on using it for a few more years until I have space for a larger jointer.
Yes, I would recommend this to a friend
This tool seemed like a good way to save space and money, but its shortcomings make it a bad deal. It is difficult to switch from the jointer/planer function. Many of the knobs can not be turned 360 degrees when the plainer table or jointer fence are in a certain position. Worst of all the jointer infeed and outfeed tables are not coplanar and have no means for adjusting them to fix the problem. Overall this tool has been a big disappointment.
Great little machine
I bought this because I have limited shop space and need a jointer/planer for my primary hobby which is building musical instruments. A jointer/planer is a must for this type of work. When i bought this I thought this would only be useful for light duty jobs but I was wrong. this machine has the power for large jobs. It cuts fast, smooth and acurate. A+++ all around.
1 - 5
Back to top
©2014 by Woodcraft Supply LLC