Festool products can only be sold in the 50 states.Power Consumption: 2.9 – 10 amps @ 120V
The new CT48 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec®) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT48 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT48 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. It will work wet or dry with no complex conversion, and it is remarkably quiet. Includes: CT 48E – 12.7 gallon HEPA Mobile Dust Extractor, HEPA filter, (1) fitted self-cleaning filter bag, and (1) 1 1/16" x 11.5ft antistatic suction hose.
Capacity: 12.7 gallon (48 L)
Noise Level: 62-71 dB(A)
96" Static Water Lift
Max Suction Force - 137 CFM
HEPA Filter Surface Area: 3.29 ft2
Dimensions (LxWxH): 38.5" x 6.5" x 28.75"
Weight: 29.8 lbs.
Power Cord 12 AWG: 24.5ft length
Stepless electronic suction control
Festool Model TS 55 REQ Plunge Cut Saw with T-LOC and Rail
The TS 55 REQ is Festool’s most advanced plunge-cut saw ever – and that’s saying a lot.
The all-new TS 55 REQ is not your standard circular saw. With its accuracy and versatility, it should be compared to the most advanced table saws, mitersaws, or panel saws available. Incredible portability and unbelievable ease of use deliver precision cutting like nothing else – equally at home in high-end cabinet shops and the most challenging remodeling sites. Packed with all the time-saving features you’ve come to expect from a Festool TS Saw, the new TS 55 REQ features a flat housing for flush-cutting against walls or adjacent surfaces, micro-adjustable depth controls, plus a host of other time-saving enhancements.
Guide Rail Precision – With the FS Guide Rail System, you’ll get laser-straight, splinter-free cuts in seconds. Simply lay the Guide Rail between two points, and you have your cutline. It’s really that easy.
Splinter-free – Cutting Splinter-guards on both sides of the blade ensure that you’ll make zero tear-out cuts in virtually any material, improving your quality of work while significantly reducing material waste.
Take the tool to the work – Replace large stationary equipment with an incredibly precise, handheld unit. You’ll save your back, while getting more out of your expensive materials.
Electronic variable-speed control automatically maintains a constant blade speed under load, and the soft start and automatic idle cut down on operator fatigue and noise. Surprisingly, the Festool TS 55 REQ uses a 6-1/4"-diameter blade, but still provides a 1-15/16" cut at 90° and a 1-7/16" cut at 45°. Festool TS 55 REQ includes a T-LOC Systainer SYS 4 storage box, 48-tooth carbide tipped blade, 55" guide rail, limit stop, and chip deflector.
Blade lock makes blade changing easy
Spring-loaded riving knife retracts automatically
Rotating dust port keeps hose out of the way
3-bearing motor for smoother operation
Festool products can only be sold in the 50 States