Sign Up Today and Get a Special 10% Off Coupon

WOODPECKERS Insert Plate Included Router Table System With 24" x 32" MDF Top

Item #158863
$529.96
Qty.   or Add to Wish List

 
0.0

(No reviews)

Write a Review


INFORMATION

Product Information:

Woodpeckers aluminum router table mounting plate for PC 7518 is stronger, stiffer and less prone to warp or flex then other aluminum, polycarbonate or acrylic router plates. Pre-drilled mounting holes for many routers with a 4-hole mounting pattern including Porter-Cable 7500 Series routers.
  • 3/8" thick fixture grade cast aluminum material with durable, low friction anodized coating

  • CNC milled to exact tolerances for perfect fit in router tables with a 9-1/4" x 11-3/4" opening

  • Pre-drilled 4-hole mounting pattern with access holes for routers with built-in lifting mechanisms

  • 3-9/16" bit opening accepts molded insert rings; includes 2-5/8", 1" and 1-3/16" guide bushing openings

  • Engraved scales to simplify fence positioning with 8 threaded setscrews for leveling

  • Includes threaded starting pin, spanner wrench and detailed instructions



  • Building on the flatness advantages of MDF, the Woodpeckers Precision Router Table Top features a lower friction “Micro-Dot” laminate, bolted-in combination T-miter channel / T-track and two embedded fence tracks.
  • 1-3/8" thick top is laminated on both sides and machined in a CNC router to achieve tight tolerances

  • Micro-Dot laminate greatly reduces drag from sliding wood over the table top

  • Anodized aluminum combination T-Miter Channel / T-track bolted from underneath

  • Two embedded, anodized aluminum T-tracks for fence positioning are spaced on 17 centers

  • Table size is 23-1/2" x 31-1/2" with 9-1/4" x 11-3/4" router opening centered length wise and offset back approximately 13" from front

  • All outside edges are sealed with PVC edge banding



  • Pinnacle® RF-3 Router Table Fence Heavy-wall triangle shaped aluminum extrusion of the fence body incorporates features normally reserved for more expensive router table fences.

  • Aluminum extruded fence body features integral dust collection with standard 2-1/4" dust port
  • Melamine coated MDF fence faces adjust for different bit diameters
  • 1/4? T-slot above fence faces for featherboards and other fence accessories
  • T-slots on the bottom of the fence body allow the fence to adapt to most router table tops
  • •Additional T-slots on the rear of the fence body allow the fence to adapt to most positioning jigs



  • Standard 27" wide x 20" front to back for typical router table tops measuring 32" x 24".


    Improved steel leg set for your router table top is adjustable in height to add a greater degree of comfort and control for most woodworkers. When choosing a size, keep in mind that your table should be at least 4” larger than the stand in both directions.
  • Constructed of heavy 14-gauge powder coated steel and made in the U.S.A.

  • Adjustable table height from 36" to 42" (345/8" to 405/8" without router table top)

  • Standard 27" x 20" size for typical router table tops measuring 32" x 24"

  • Larger 37" x 20" size for router tables tops 42" and wider

  • Features two separate braces to further support the center area of your table

  • Stands can be used with both center and offset style router table tops

  • Includes (4) adjustable non-skid levelers, assembly hardware and instructions
  • California Residents: Click here for Proposition 65 information.