Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 1
Back to top
Excellent little bullet catch
Vertex Brass Ball Catch 11/32" diameter
An excellent bullet catch for inset cabinet doors. Quality material and workmanship, and when properly installed, gives a very easy, but satisfying latch to your cabinet door. Only drawbacks are the unusual diameter (which requires an 11/32" brad point or forstner bit - not a usual size) and the fact that there are no installation instructions (which could be a problem for the novice).
Tip for installing: carefully drill 3/8" diameter hole with a flat bottom (brad point or forstner) bit in scrap until you have the exact depth you need (both ball and catch should be in the wood flush with the barrel edge). The catch will pop right out of the 3/8" hole as you close in on the right depth. When you've got the depth you need, use the hole to set a depth collar precisely on your 11/32" bit. A 3/32" clearance between door and frame then gives a perfect close.
Yes, I would recommend this to a friend
1 - 1
Back to top
©2014 by Woodcraft Supply LLC