Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
People Like Them
Seam Ripper Kit Chrome
This is an update to my earlier review. I've made and sold several of these.
A couple of hints for assembly. After gluing up, I use a rotary tool with a small brass brush to clean up the ends of the brass tubing. I also spray some silicon on a cotton swab and spread it around the inside of the tube to make the O-ring easier to slide.
The O-rings are a pain to put on, and if lost or broke (and you will) it's really hard to find a replacement.
I usually don't put on the pocket clip. Some buyers have asked me to remove them. Also some users prefer a bit of a lip at the end to give them something to push against when ripping.
Nice kit and goes together well.
Yes, I would recommend this to a friend
Pretty nice kit
I just finished a kit. It was the first time I ever turned this type of item (with pen/seam ripper mandrel). It was somewhat confusing when setting up the turning and mandrel, but it seem to end up OK. I think I got the wrong size bushing on the wrong end, and even after finishing it, I'm still not sure.
The clip isn't the handiest if you make a fatter handle. I had to bend it to fit better, but it works OK.
The O-rings are finicky to install and I have some reservations as to their durability. I used a rotary tool with a brass brush to clean up the inside of the brass tube before I put the sharp end together.
All-in-all, a pretty simple gadget. My quilter wife likes it, and has ordered some for Christmas gifts. If she likes it, I like it.
This is a good project but the o-rings tend to break easy. Use a little Vaseline to help protect the o-rings
1 - 3
Back to top
©2014 by Woodcraft Supply LLC