Save 10% on Select Power Tools
Now's your chance to save on power tools. July 25 & 26 only.
Save 20% on Wood Supplies for Your Shop
What will you make?
15% Off Shop Accessories
Save on stools, mats, supports and more!
Outfit Your Shop
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Works great Just want to learn more!
StickFast CA Finishing Kit
This finish works great for pens. Have tried this on pepper mills with good effect, but need more practice.
Yes, I would recommend this to a friend
Great product. Quick, flexible finish. Allows you to quickly build up layers. Overspray on aerosol activator can waste the product, be better in a pump.
Not my favorite Ca finish kit.
I recently stated using this product. I was in the woodcraft store looking for CA glue mainly for finishing my pens. I have had great luck with Titebond products but was inquiring about other CA glues and which one might give me the best results. They recommended this kit. The last week I've made approx 15 pens and had 10 of them to redo the finish. I found that the finish is very brittle. It takes little effort to chip the finish either by a simple bumping the pen against something or sometimes pressing in the parts. The finish is a nice finish but having to deal with it being brittle is not what I'm looking for. Selling or giving a pen to someone and it having durability issues is not good.
No, I would not recommend this to a friend
Almost excellent product!
I use this product on pens and other turned items and find the CA Glue and Activator work great. After applying about five coats of CA, followed by a light sray of the accelerator, I lightly sand using a 600 grit sanding pad soaked in water, then switch to the micro-mesh sanding pads (soaked in water) beginning with the 1500 grit and proceeding through all of the finer grit pads - using each for about 15 seconds. Although I have used the polish in this set for the final polish, I have found that another brand's polish, is more effective than the stick-fast polish. It's not that the included polish is bad, it's just that the other brand seems to improve the shine. I would recommend this product.
1 - 4
Back to top
©2014 by Woodcraft Supply LLC