$500 Off NOVA 1624-44 Lathe
Whatever projects you turn, the Nova 1624-44 wood lathe will meet your needs for a lifetime.
Buy Now $899.99
Go Mobile w/Heavy-Duty Casters
Save 30% on Heavy-Duty Casters through April 25.
Shop Sizes & Styles
Buy Laguna 14-12 Bandsaw & Get a Free Industrial Flood Light
Perfect for serious woodworkers and hobbyists.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Very worthwhile finish
Oakland County, Michigan
General Finishes Wood Turners Finish 8oz
General Finish's Wood turners Finish is a bona fide, high quality product that makes no wild claims but delivers superb results. I was using it on some small items and splattered some on a Formica table top. During the first 24 hours I could barely scratch if off the surface. After that, forget it. No scratching it off, hard as nails, and tough as a Democrat in the cheese line. It is also high build so you can apply several coats and achieve a very protective finish, even on Formica. High gloss too unless you want to knock it down with fine abrasives.
Yes, I would recommend this to a friend
Easy to apply while the lathe is turning slowly. Dries quickly so allow multiple coats in a short time.
It is water based. This keeps the smell down, but also raises the grain.
Wipe on with small piece of a scotch bright easy eraser while turning your piece on the late by hand at about 40 rpms. Keep turning slowly for about 5 min till dry. use a hair dryer to speed up (just a bit or it will burn/bubble). Sand with high grit (15000+) paper. Apply another coat after 15-20 mins.. I do 7 or 8 coats. Then flip and recheck for second side.
No smell, no vapors, no flammable rags. Great!!
Images shared by
Made with Product, Using Product
1 - 3
Back to top
©2014 by Woodcraft Supply LLC