Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
Bessey engineer gets an A from me
Bessey Auto-Adjust Horizontal Toggle Clamp High
OK, so this is billed as an "auto-adjust" clamp. What that comes down to is that you select the clamping force once and then you're done. A huge range of thicknesses is accommodated; thick to thin, all are squeezed with the same force. This is accomplished with a very clever and compact mechanism. I mounted it temporarily and passed it around the table at gents' coffee, and everyone admired it as much as I did as it grabbed any of a selection of sticks. Force is adjusted with easily accessible screw, but you might need a small wrench to work the jam nut if you want to secure it in a production situation. I like the two-parameter adjustment of the pad: distance from pivot and height. You can see this aspect in the catalog photos, though the auto-adjust mechanism is not visibly obvious. As an engineer I want to take it apart, but I shall resist the temptation. It's so solidly put together I'd bust it in the attempt. Buy one, try it, and you'll be back for more.
Yes, I would recommend this to a friend
I bought these to add to a horizontal router table I had set up for mortising. I was constantly going between different thicknesses of stock and resetting my old toggle clamps for each stock thickness was a pain. I was skeptical at first but these work exactly as advertised. They get moved from one jig to another and my old toggle clamps, which I have lots of, don't get used any more.
1 - 2
Back to top
©2014 by Woodcraft Supply LLC