New Festool TS 55 REQ Plunge Cut Saw
Festool has made the best plunge saw better.
JET Benchtop Spindle Sander
Save $100 on this customer favorite!
Save $50 on HTC-3000 Mobile Base
Fully adjustable, holds up to 700 lbs.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 7
Back to top
Best buy without doubt
JessEm Rout-R-Lift II Router Lift For 3-1/2" Diameter Motors, JessEm# 02310
I've been struggling with router tables for years (even built three of my own). I finally gave in and bought the JessEm Rout-R-Lift II Router Lift and am still wondering why I waited. Easy to install, I made my own template and fit the lift into an existing (commercial) router table top. The lift is VERY precise and very easy to use. The lock mechanism gives me a lot of confidence in each cut. Highly recommend this unit to any woodworker using a router table.
Yes, I would recommend this to a friend
Worth every penny
Brent in PA
North Wales, PA
This thing rocks! I'm using it in my shop-built router table with a Porter Cable 691 router motor, but it will fit just about any 3-1/2" motor. Adjustment is smooth and accurate. One turn of the handle is exactly 1/16" which makes setting depth of cut trivial. Above the table bit changes are easy, just raise the lift all the way up. You don't need any special bent wrenches. Installing it was simple too, as Woodcraft also sells MDF templates for routing the cutout in the table top. All around a great product.
Just say YessEm to JessEm!
Jack of all trades master of some.
I just finished making a routertable extention on my tablesaw. I still have to make an extention fence to use the router but I have installed the router in the lift and it adjusts up and down very smoothly. Being a machinist I can say this is a very well made piece and worth the price. I see the other models and couldnt justify the extra $$ unless it was used full time as a business. Look forward to using it.
I like it a lot
newark/east orange nj
I think it should bring 3 ring set
I should have done this years ago
this is the best tool I have ever bougth. It saves so much time and with a bigger router table the safety factor is so much better. I have cut donw on the amount of time it takes to mesure each depth movement by just using the crank handle and watching the gauge. Every workshop should have one of these.
Jessem Quality Lift
I have been using a home made router table for about 8 years now and have always had problems with changing bits and adjusting height.
I am not a pro woodworker, but the overall quality of this lift is fantistic. I ordered the lift at my local woodcraft store. They haven't seen one because it was so new. When we opened the box at the store, they were as impressed as I was as to how well this lift was made. The workmanship and material it is made of looks to be top quality. The plate is supported by 2 alloy braces so I really don't know how the plate could ever sag. My router is a Bosch 1617 and it fit perfectly in the clamp.
This lift is not made for the larger routers, but for what I will be using it for it will be great.
If you have a 3 1/5 hp router, get one with the alloy plate.
Will it hold up under very heavy use? I don't know, but if it works as good as it looks I think I will be very happy.
Thanks Jessem for another fine quality product!
Now all I have to do is build a new table for the lift or buy a new table.
I guess now I have to go back to Woodcraft to look at new tables.
Sweet Router lift
I absolutely love this lift works great makes the job 10x quicker
1 - 7
Back to top
©2013 by Woodcraft Supply LLC