New Festool TS 55 REQ Plunge Cut Saw
Festool has made the best plunge saw better.
JET Benchtop Spindle Sander
Save $100 on this customer favorite!
Save $50 on HTC-3000 Mobile Base
Fully adjustable, holds up to 700 lbs.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 7
Back to top
WoodRiver Bed Rail Bracket Set
We were very impressed with the design, functionality and how strong this hardware is. We purchased one, and will be purchasing large quantities often for our bed designs.
Yes, I would recommend this to a friend
A good idea but I still experienced a lot of free play around the axis of the bolt and around the vertical axis as well (I did not, however, use it in the configuration shown in the picture, which may explain some of that).
A Solid Soloution
I used two sets of these brackets for some bunk beds and they were easily mounted. They created a solid connection, and the beds have very little play.
The Frame Man
I've been building furniture frames for over 25 years. I always hated when a customer would order a bed frame because of the poor options available for fastening the rails to the headboard and footboard. This is the solution! If you have any woodworking know-how at all this is easy to install, firmly tightens the joints together and most of all my customers love it. I never comment on any of this stuff but this thing is worth the time!
Worked for me
The cheap dad
The woodlands tx
I'm not sure how this got a negative review. There are no instructions but they are not needed. I got and used 2 sets and they did everything as advertised. I thought it was ten bucks for one corner, but when I saw it was for the whole bed, I thought I had stepped back in time to the 1950s or something. They are very solid and lock together nicely, come to think of it, the 100 #8 screws nearly cost as much as the brackets.
Not impressed at all.
Thought this might be a good solution for improving an existing bed. WRONG. First, it is NOT flush mount. You will need to drill a recess for the bolt end and receiver on the headboard. With only one point of attachment (the bolt), there is too much play allowing the bed to rack too much. Also no instructions included. Looked promising, but I think I'll throw the other two sets in the trash and cut my losses.
No, I would not recommend this to a friend
Simple and wobble free corner bracket
Tom the tinkerer
These are great for concealed connections. The integral bolt makes it easy to solidly lock down the corners. Alignment posed no problems, but installation requires a recess to clear the protruding threads and bolt. That's a minor hassle but I just use an oversized forstener bit to keep things easy.
1 - 7
Back to top
©2013 by Woodcraft Supply LLC